Question about Televison & Video

1 Answer

Toshiba sd-4990 dvd player will not load a disk

Have tried a lens cleaner disk and only get the ''loading'' display

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your toshiba is not spinning that's why it keeps on saying loading. Unplug the dvd Open the device,once open plugin the dvd and put the dvd cleaner in the player. take your finger on the top where the dvd disk is and spin the disk. What happening is that you are cleaning the len. keep spinning until it spin on its own.Put the toshiba top back on and clean again. It should clean on it's on. Now you can play your dvd. Clean your dvd on a regular basic.

Posted on Jan 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for code for URC-4220 for my Toshiba DVD/Video Cassette Recorder SD-V290


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily..
http://electro-medical.blogspot.com/

Jan 11, 2017 | Toshiba Televison & Video

1 Answer

Sony 5-disk carousel player will not open. Model DVP-NC685V.


Disc loading mechanism fault. Might be due to a broken loading belt, or broken gear wheel/s. You have to take the mechanism out from the device for repair, and it is somewhat skilled work. Contact any service technician to get this set repaired. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Jan 10, 2017 | Sony Televison & Video

1 Answer

How to eject a DVD disc stock inside of Samsung blue ray DVD player does not have DVD tray


There are many reasons for this fault. Visit the site linked below for more information. Type in the brand name of the device in the search box at the top of the display window to get gathered all the related posts. http://electronicshelponline.blogspot.com/

Jan 08, 2017 | Samsung Televison & Video

1 Answer

My Toshiba remote control se-r0077 sometimes works to control the DVD player and other times it doesn't. I've tried new batteries and the problem still persist s


One of the best ways to check if an infra-red remote controller is working properly is to look at it using a camera. (a webcam or phone camera will work) The camera will see the infra red radiation as visible light. If the LED lights up (on camera) consistently when buttons are pressed, then it may not be the remote at fault, but rather the receiver in the DVD player. Most of the time though, it IS the remote control at fault, and these are usually easy to get working again.

Couple of things to check are:

1) the battery terminals...
Batteries can leak and corrode the terminals in the battery compartments. Signs of this include rust, green coloured contacts, or a crystalline deposit. If you see any of this then clean the contacts using metal cleaner or some methylated spirit and cue-tips.

2) Broken wires connecting battery terminals to the circuit board...
The soldering in some remotes can be rather poor, and wires can sometimes come loose, especially if a remote has been dropped or bashed about a bit. Unscrew the remote and check everything is connected properly


3) Dirt under the buttons...
This can prevent a button from making contact with the circuit board properly. Unscrew the controller and separate the rubber button pads from the circuit board check for dirt both underneath the pads AND on the metal contacts on the circuit board. Clean as required with methylated spirit and cue-tips and then reassemble.


Hope that helps!

Jan 07, 2017 | Toshiba Televison & Video

1 Answer

My govideo recorder model R6530 no disk appears when i put a DVD+R what am i doing wrong


The inability to read DVD+R disks probably is the reason the recorder was offered for sale on eBay.

Jan 07, 2017 | GoVideo Televison & Video

1 Answer

Turned on my Hitachi DVD/VCR combo DV-PF4E}, put in DVD it showed LOADING then it just turned itself off!


Disc loading mechanism fault. Contact any service technician. Loading mechanism should be taken out from the set for repair. If you wish to get more details
http://electronicshelponline.blogspot.com/ Visit this site.

Jan 07, 2017 | Hitachi Televison & Video

1 Answer

The DVD player on my Bush 32inch television takes in DVD's but just displays 'No Disc' the model number is DLED32165HDDVD Is it something I can fix?


The player has failed, these types of devices are not fixed as the cost to repair is in some cases more than a new one. More than likely you could not get parts for it even if you knew the cause, which is most likely a failed laser light

Jan 06, 2017 | Bush Televison & Video

1 Answer

My factory DVD player will except disc the ejects it


If I understand your rather cryptic post correctly...

This very well could be a Blue-Ray disk loaded into a
non-Blue-Ray capable DVD player. Your car player's capabilities MUST match the disc, otherwise, the disc won't play.

I've run into this very same problem with my home DVD players. Which both are non-Blue-Ray capable, but I was able to verify the Blue-Ray discs on my PC.

Jan 02, 2015 | Televison & Video

2 Answers

My dvd player stopped working


It happens, replace with a new one as they are cheap.

Jun 06, 2014 | Televison & Video

1 Answer

DVD player wont eject dicks or play just say's disc error


You need to insert dicks into the DVD player, also, once it ejects the dicks, you should wait 20 minutes or so before attempting to eject more dicks.

Jun 26, 2012 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...