Question about McCulloch Chainsaws

1 Answer

McCulloch mini pro chain saw HI & LO fueling settings

HI & LO fuelling settings for mimni pro chainsaw

Posted by on

  • holmes21 Mar 15, 2009

    Thanks for your help the saw seems to be running fine now

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 181 Answers

Carb setting are 1 turn out from bottem on both high and low side. i usually start at 1 1/4 turn, seems to work better.just don't that hi side any lower that 7/8 out, if you do you willl burn the saw up from running to lean.....

Posted on Mar 12, 2009

  • steve
    steve Mar 13, 2009

    never.... never... never use carb cleaner or starting fluid to start a two cycle motor.it dries the cylinder out and burns the piston rings.to prime a two cycle use a little mixed fuel down the spark plug hole.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get to the oil filter and how do you clean it and change it.


How to clean the chainsaw's air filter - YouTube

? 3:11
https://www.youtube.com/watch?v=wozSufvtbfE
May 30, 2012 - Uploaded by iScaper1
Tips for removing and cleaning the air filter on a Stihl MS250chainsaw. ... A very dirty air cleaner, a little maintenance can help them live longer ... Poulan Chainsaw Review- Should youbuy one? ... chainsawbars.co.uk - cleaning the air filter andchanging spark plug ... Get video URL at current time.

Mac 3200 chainsaw oil tank repair - YouTube

? 3:21
https://www.youtube.com/watch?v=XXlm-o8sD6A
Jul 17, 2012 - Uploaded by conan6868
Repairing oil tank. ... Could You Fix This Mini Mac Chain Saw! ...The chainsaw guy takes the McCulloch Mini Mac ChainsawChallenge 9 23.
Mucculloch 3516 chain saw assembly - YouTube? 49:25https://www.youtube.com/watch?v=Xm4YL3pDG8cJan 20, 2014 - Uploaded by Dragracer64In this video I take a box of dirty chain saw parts that has been sitting in my attic for about 12 ... Is there supposed to be a filteron the line in the chain oil tank? .... How to replace MCCULLOCH chainsaw MAC 3516 fuel line.How to replace MCCULLOCH chainsaw MAC 3516 fuel line ...? 1:32https://www.youtube.com/watch?v=GMjXYKza-NYJan 13, 2013 - Uploaded by Lambda ITCMCCULLOCH chain saw MAC 3516 chainsaw fuel line replacement. Three fuel lines. 1) First line in the tank ...

Dec 27, 2015 | McCulloch Chainsaws

1 Answer

Mcculloch MS 1415 electric chain saw throws chains


I had a saw that did that and found my blade the chain runs in was bent. Another problem was the groove the chain goes in had a gouge that did not look like much but was just enough to throw the chain. Also check the drive sprocket and make sure it lines up with the groove in the blade the chain runs in.I replaced the blade and its ok now.

Sep 15, 2015 | McCulloch Ms1415, 14" Chainsaw Chain 49dl...

1 Answer

What type oil for chainsaw, both w/gas for fuel and also chain lubrication


You mix 2 stroke oil with the petrol/gas at a rate of 40:1 (40 parts petrol to 1 oil). For longer life use a good quality oil like Husqvarna or Stihl rather than the cheaper types you buy at car service stations.

The oil you use for the chain lubrication is just known as chain oil and can be bought at tool hire outlets.

Mar 29, 2011 | McCulloch Chain Saw Scrench For Homelite...

1 Answer

I have a McCulloch chain saw- pro mac - 610- the saws chain lock came apart, do you have a diagram of one?


This saw? Be kind to your elders.
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/564ff25e56449e8c88256c2f001cd723?OpenDocument

The IPLs I’ve found for your saw don't show this detail. I suggest you try here:
ArboristSite.com Chainsaw thread
http://www.arboristsite.com/forumdisplay.php?f=9 (free to join)
There is a McCulloch thread. Your saw is held in high regard. I’m quite sure some of the members will be willing to post some close up photos of the set up on their saws. HTH
Lou

Sep 27, 2009 | McCulloch Chainsaws

1 Answer

I have a McCulloch 10 10 Automatic Chain Saw. What is the oil to


40:1 of two stroke oil roughly 2..5% 40 parts fuel to 1 part oil mixed Good Luck the Yeti

May 17, 2009 | Chainsaws

1 Answer

Need owners maual for mcculloch power mac 6 chain saw


try my answer to the post on McCulloch pro/mac 10-10 chainsaw owners manual... posted by denniswick on Oct 03, 2008

Jan 27, 2009 | Chainsaws

1 Answer

McCulloch Pro Mac 610 replacement chain


The McCulloch ProMac 600 series (610/650) doesn't recommend a saw chain replacement part because you can get differently-sized bars for it. This one came with a 20" bar.
According to an Amazon.com search tonight, the Oregon company makes a replacement part stock number D70. I have got an Oregon H78 replacement chain at my hardware store and it's a hair too small. Not all 20" saw chains are created equal!!

Dec 07, 2008 | Oregon Scientific Oregon S54 Replacement...

Not finding what you are looking for?
Chainsaws Logo

Related Topics:

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Chainsaws Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

375 Answers

Phil Walker
Phil Walker

Level 3 Expert

602 Answers

Are you a McCulloch Chainsaw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...