An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert whose answer got voted for 20 times.
Re: Ethernet controller not installed on XP Professional
The best way to get the drivers you need is to go to www.hp.com and search for your drivers there using the model number for your computer. Of course, this assumes that you can get internet access from somewhere else besides the computer that you are working on. If you don't have another place you can get on the internet, try your local library. Many of those have free internet access. In my experience, the most likely driver for your computer would be either the Broadcom Netextreme or the Intel Gigabit driver. Good Luck & thanks for using Fixya
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
after that, try again if necessary to install the drivers. If it still fails you don't have the right drivers for your device and you need to manually look for the device type and model nr on the card itself and download them from the manufacturers website. Good Luck !
Click here to go to HP's Driver page you can type in the model of your computer to download the drivers then transfer the driver files with a CD or USB Drive to install them on the HP tower. This should get all the components like Ethernet/ sound/ and video back to normal :) Hope this helps. Best of luck to you :)
I hope the following information is helpful.
If you are trying to install the driver for the Broadcom ethernet NIC that was pre-installed (NOT an ethernet card that you purchased and installed yourself), there is a softpack (updated driver installation) download available from HP/Compaq. It will install the driver automatically for you, just download it from the link below and run the ".exe" file.
IMPORTANT: Check to be sure that your current Operating System, and model of the network device you are trying to install, are BOTH listed below BEFORE you download!
This is a software / driver update for the HP Compaq d530 ultra-slim desktop: All Models Supported network devices: BCM5906MBroadcom 10/100/1000 5782 based NICBroadcom 570x 10/100 Integrated controllerBroadcom NetXtreme Gigabit Ethernet 5782Broadcom NetXtreme Gigabit Ethernet PCI-ExpressNetXtreme(tm) 10/100/1000 Gb NIC Supported Operating Systems:Microsoft Windows 2000
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows Vista Business 32 Edition
Microsoft Windows Vista Business 64 Edition
Microsoft Windows Vista Enterprise 32 Edition
Microsoft Windows Vista Enterprise 64 Edition
Microsoft Windows Vista Home Basic 32 Edition
Microsoft Windows Vista Home Basic 64 Edition
Microsoft Windows Vista Home Premium 32 Edition
Microsoft Windows Vista Home Premium 64 Edition
Microsoft Windows Vista Starter 32 Edition
Microsoft Windows Vista Ultimate 32 Edition
Microsoft Windows Vista Ultimate 64 Edition
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 EditionINSTALLATION INSTRUCTIONS:
1. Download the file by clicking the "Download" or "Obtain Software" button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).
2. Double-click the downloaded file and follow the on-screen instructions.LINK where file can be downloaded:HP/Compaq Support-Broadcom Driver download Again, I hope this information is what you neededto install your network device. Should this not answer your question, please come back, provide more details of your problem, and we will be happy to help!Best of luck to you!
Kindly check out the following link http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=316715&lang=en&cc=us&prodTypeId=12454&prodSeriesId=316713&taskId=135.....it has all the specifics i.e. Win XP,Win Vista...etc.....
Hi there. You don't need the model number of the ethernet controller itself, you have already provided the information i need to help you (the computer make and model). Go here to HP support, choose your operating system (win2000, XP etc) download and install the LAN (network) driver >>>>>>