Question about One For All URC4220 Remote Control

1 Answer

Need to program my oneforall remote to my tv, can you help?

I have a Signature TV with a oneforall remote # URC 4220, can I program my remote to this tv?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cannot program myoneforall to my tv

Posted on Jun 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the code for a sanyo tv and how do I program it


If your TV is older than the URC-4220, the code should be 0154. (The universal remote generally can only control devices that were released about 6 months or more before the remote was programmed.)

To program the remote, turn on the TV manually. Then press the TV button on the remote once. Press and hold Set until the LED blinks twice. Release the Set button at that point. Enter 0154, check if the LED blinks twice again. If the LED blinked properly, point the remote at the TV and press Power. If the TV turns off, this is the correct code. If you take too long between steps, the remote may leave the setting mode. If the LED didn't blink, start over from pressing the TV button on the remote.

The manual for the One-for-All URC-4220 remote is available here: http://voxrightnow.custhelp.com/app/answers/detail/a_id/11828/~/programming-and-operating-the-oneforall-urc4220-universal-remote-control . Scroll past the directions for using and programming the remote to the link to the Owner's Manual. The list of codes starts at page 36.

I hope this helps.

CIndy Wells

Feb 10, 2015 | One For All URC4220 Remote Control

Tip

One For All URC-4220 Code Search



One For All URC-4220 Universal Remote Code Search

f8b305f.jpg

To program your One For All URC-4220 universal remote control to operate your TV, the remote has a code search function.

To search for a code for your TV:

  1. On the remote control, press TV once.

  2. Press and hold SET until the LED blinks twice, then release SET.

  3. Enter 9 - 9 - 1.The LED will blink twice.

  4. Aim the remote control at the the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.

  5. To lock in the code, press and hold SET until the LED blinks twice, then release SET.

I hope that helps.
___________________________________
One For All URC-4220 Manual
One For All URC-4220 Code List
One For All URC-4220 Code Entry
One For All URC-4220 Code Search
One For All URC-4220 Reassign Key

on May 30, 2010 | Remote Controls

Tip

One For All URC-4220 Code Search


One For All URC-4220 Universal Remote Code Search

f8b305f.jpg

To program your One For All URC-4220 universal remote control to operate your TV, the remote has a code search function.

To search for a code for your TV:

  1. On the remote control, press TV once.

  2. Press and hold SET until the LED blinks twice, then release SET.

  3. Enter 9 - 9 - 1.The LED will blink twice.

  4. Aim the remote control at the the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.

  5. To lock in the code, press and hold SET until the LED blinks twice, then release SET.

I hope that helps.
___________________________________
One For All URC-4220 Manual
One For All URC-4220 Code List
One For All URC-4220 Code Entry
One For All URC-4220 Code Search
One For All URC-4220 Reassign Key

on May 30, 2010 | One For All URC4220 Remote Control

1 Answer

I need the code for my sanyo tv for my oneforall urc-4220 remote


I know its 0154 but if this didn't work. Try this link....download the manual and all the codes for different TV are listed. http://www.retrevo.com/support/One-for-All-URC-4220-Universal-Remotes-manual/id/2881bh239/t/2/

Mar 11, 2011 | One For All URC4220 Remote Control

2 Answers

I need the code to my TV set Sylvania I have the oneforall URC-4220 remote


0000, 0035, 0043, 0081, 0593,
1593 These are the codes listed for your tv. If you need the instructions click on this link.

http://www.oneforall.com/support/manual

Dec 13, 2010 | One For All URC4220 Remote Control

Tip

One For All URC-4220 Code Entry To program your One For All URC-4220 remote...


One For All URC-4220 Code Entry

f8b305f.jpg

To program your One For All URC-4220 remote control to operate your TV you can use the direct code entry function.

To enter for a code for your TV follow these steps:

  1. Turn on your TV.
  2. On the remote, press the TV key once.
  3. Press and hold SET until the LED blinks twice, then release SET.
  4. Enter the first four-digit code from the code list. The LED will blink twice. If it does not blink twice, go back to step 2 and try the same code again.
  5. Aim the remote at the TV and press POWER. The device should turn off. If it does not turn off, repeat steps 2 through 5 with the next code in the list.

I hope that helps.
____________________________________
One For All URC-4220 Manual
One For All URC-4220 Code List
One For All URC-4220 Code Entry
One For All URC-4220 Code Search
One For All URC-4220 Reassign Key

on May 30, 2010 | One For All URC4220 Remote Control

2 Answers

Oneforall remote wont work with my dynex tv!!


I used 0463 for my 19 inch DYNEX LCD TV. It's the code for Emerson & Admiral. :)

Jul 23, 2009 | One For All URC-4021 Remote Control

7 Answers

One for all URC4220


go to one for all universal remotes

Feb 13, 2008 | One For All URC4220 Remote Control

Not finding what you are looking for?
One For All URC4220 Remote Control Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...