I have created new shares on NSS4000 as a public, accessible for domain users and admins. The NSS4000 used LDAP tool to get data from domain - successfuly. The share type is CIFS. From our local PC workstations I can access it, but it is not possible to connect the shares from any server, although it is possible to ping it.
If I use net use command, any time give following error message:
System error 67 has occured. Network name not found.
The same result is during usage of Explorer. The firewalls are not activated. We are using Ethernet 100/1000, TCPIP protocol.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check on BlackArmor Manager that the FTP mode is enabled for the folder you want access to. You can check it by typing "http://192.168.1.66" in the adress bar on your explorer, enter your login and password ("admin" and "admin" by default), then click storage -> shares if "FTP" is disabled, click on the pen (modify) and enable it. don't forget to click "submit" ;-)
There are a variety of ways to display the NSS Login window.
•Open the Web browser on your computer: In the Address field, enter "http://NAS<MAC address>" (For example, "http://NAS0018F804E44C".)
•Browse for the NSS from the My Network Places window.
•Select the NSS to a network drive from a mapped network drive.
The NSS Login window appears:
Also please follow the below link for manual it will help you to setup
You can check the settings and if it is again again losing the settings then there might be a possibilty that the firmware of Nss4000 has gone faulty or is corrupted.
You will have to upgrade it through the CD provided to you or best will be to contact Linksys and they will be able to give you the exact information...
do you have an admin icon on your desktop?
if not type in the ip addx 192.168.1.1 and see if you go to the admin.
on network connections , right click on my network places, click map network drive,
select a drive letter and then browse for the two folders on the "myserver" select one of them and click apply or ok. the drive will show up in mycopmuter do the same for the other folders
as far as the log in is concerned it is best to set a level 3 user name and pw on the server then do the same user name and pw for a new windows login user.
On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."
Once you are past the login screen, you are able to reconfigure the LinkSys router
* see netlogon service is running on the server
* verify the srv record on the server
( http://support.microsoft.com/kb/816587 )
*see all authentication on the DC
*check the event viewer if any error is occured
*veryfy the DC