Won this item on ebay, LEDs did not work, figured that out but now while playing cd's it just stops playing and after about 30 seconds restarts cd, about a min into playing it does the same thing. It takes forever to switch between songs and if you turn off the car it does not save the song you were on it instantly goes back to first song. Anyone have any ideas. I have no manual and cant find one online
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Supported Audio Formats Audio CD, MP3 Supported Video Formats DVD Number of Audio Channels 4 Channels Included Units In-Dash Player, In-Dash Monitor, Amplifier Supported Media Types DVD-R, DVD-RW, CD-R, CD-RW Monitor Size 6.5 inch Touch Panel With Touch Panel
Just stick with these formats and it should work fine...are you trying to view burned movies or something. From the looks of it, it should play any DVD or CD just fine. Try to steer clear of those formats you listed.
yes its saying in toorder to play dvd's u must engage parking brake which means the wire is suppose to be hooked up to the parking brake....BUT i know the trick to make it work where u can play dvd's and drive
open up your dash get 1 short RCA cable (red and white) male ends on them
now place the red and white RCA into the back of DVD in-dash player next step the aftermarket CD player should have 2 rca plugs that say aux put the other end red and white RCA cable that you just put into DVD unit into the aux inputs on back of CD player when this is done reinstall both units back into the dash now on your CD player press the source button till aux appears once this is done you will hear the DVD player sound...........now if you press the source button and no aux appears......hold down the source button till the CD player powers off...........once CD player is off hold down the F (function) button till beep or unit turns on a display use the skip buttons or F (function) button to go threw features once you get to aux turn aux to on now hold the source button down again till unit powers on normally once this is done press source button again till you find aux........if you get sound and the TV doesn't work let me know and ill guide you to get that running too (if there are no aux RCA plugs on the back of CD player) let me know (sometimes there is a headphone looking plug on back of CD units) if what i told you doesn't work let me know the brand of CD player you have so i can give you correct setups I'm only going by your in-dash DVD player right now
hope i was able to help get you sound
Most in car dvd players require a connection to the parking brake so it will not play a dvd while you are driving (in dash only). The easiest way around it is to run a 12v wire to the lead of the parking brake wire on the dvd player. With a constant 12v it should play when the ignition is in the on position.