- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This error can possibly be caused by either a full paper exit bin or a stuck/loose paper exit flag/guide on the top right-hand side. Perhaps this article might guide you on what to do. Just click on this link: http://bit.ly/a4odfK. If problem continues after following the instructions in the article, don't hesitate to contact Lexmark technical support or an authorized service provider for further assistance. Thank you for choosing Lexmark.
Maybe the paper exit guide is stuck or loose. Here's an article on A "Remove Paper - Standard Bin" or a "Std Bin Full error" Is Appearing on an E250d(n), E350d, E352dn, or E450dn Printer. Just click on this link: http://bit.ly/aygJz1. Follow the instructions. Thanks
Here's an article in the Lexmark website on A "Remove Paper - Standard Bin" or a "Std Bin Full error" Is Appearing on an E250d(n), E350d, E352dn, or E450dn Printer. Just click on this link: http://bit.ly/do0N3V. Read thoroughly and follow the instructions. Hope this helps. But if problem persists, I strongly suggest you contact Lexmark Technical Support to further investigate the problem. Thanks.
The Standard Bin Full message is refering to the main output tray for the printer. If you have nothing mounted to the top of the printer, then the standard tray is where the paper is exiting.
What the message is telling you the bin is full and it is not, most likley the failure is that the sensor (a piece of wire is jammed in the up position. Just release the wire and let it hang down. That should clear your message and let you start printing again.