Question about LG RU-42PX10 42 in. HD-Ready Plasma Television

Open Question

My tedelex plasma EC-PD1000,works 4 days on,5days off..

Ytyui

Posted by on

1 Suggested Answer

  • 2 Answers

SOURCE: my plasma tedelex no sound no picture but power is on

Sounds like (at minimum) you're going to need a new Y sus board. If you're lucky, you won't need the Z sus board, too. Many times they both go out at the same time.

Posted on Oct 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant find where the antenna cable must plug into Tedelex Flat view TV Model EC-PD5000


When looking at the back of the TV it is towards the bottom furthest right of all the connections!

Nov 16, 2014 | Flat Panel Televisions

1 Answer

Which program runs "copied" movies through the Tedelex HDMI - model EC-3293LCD?


If the TV has the ability to run video files from a USB stick, then it will be listed as a source. Select the source; something like Media Player.

The USB stick has to be formatted in the correct file format. Also, the movies themselves have to be in the correct format too e.g. DiVX, AVI etc.


Tedelex isn't a well known brand. There isn't good online support for the brand. You will have to read your user manual.

Post any future questions iin the forum marked Flat Panel Televisions

Sep 20, 2014 | Flat Panel Televisions

1 Answer

I have a tedelex plasma tv the model of the plasma is ec pd300 . on any in put the plasma says there no signal


if any of the component input doesn't work or not recognized a source the cause will be a bad signal input board. check for bad component like open resistance and burnt parts.

Aug 17, 2012 | Flat Panel Televisions

2 Answers

47" plasma 1080p ... screen went black , sound


Plasma TV's have a shelf life. By that I mean the screen is only good for so many hours depending on the model. Most likely, you have burnt out the screen and the set will need to be replaced. The good news is, plasma TV's used to be better than LCD but that is no longer the case. You can get a very high quality LCD TV for a very low price now. Also they use a fraction of the power and don't generate all of the heat of a plasma.I'm sure this is not what you wanted to hear but the reality is that ALL plasma TV's do this eventually, and it is something that most salesmen back in the day didn't bother to tell customers. If you have an extended warranty, you may be able to get it replaced.

May 05, 2011 | H&B HP5500V Plasma TV

1 Answer

Shows no picture but has sound its a tedelex 42 inch


if you had no prior ideas about plazma tv . then call to some experienced person so that he can help you. oterwise take to the repair center .

Dec 07, 2009 | Philips 42HF7444T 42 in. Plasma TV

1 Answer

My plasma tedelex no sound no picture but power is on


Sounds like (at minimum) you're going to need a new Y sus board. If you're lucky, you won't need the Z sus board, too. Many times they both go out at the same time.

Oct 26, 2008 | LG RU-42PX10 42 in. HD-Ready Plasma...

1 Answer

Tedelex EC-PD3000 Manual


go to the offical wesite of the manufacter

Sep 21, 2008 | Flat Panel Televisions

1 Answer

Tedelex EC-PD2000 42" plasma TV


Yes, I had the same problem, it happened after 14 months of my purchase, or just 2 months after expiry date of warranty. But remember they have 60,000 hours warranty on screen and this fault is part of screen (no picture J it is screen problem), I called LG, first they did not accept the claim but soon after I mentioned that I have done many research and this is very common problem due to use of faulty part or unreliable design, and if they don't fix it on their cost I will take legal action, one of the supervisor contacted me and after saying LALALALALALALALALALA accepted to send someone to fix with no cost. But I have found out they did to many others whom take this mater serious so it was not just me alone J They are aware of using faulty part is some ranges of their products and now this common problem appears, LG don’t like it and wants to somehow get away. ((((((((((So don’t let it happen))))))))) some of us paid around $5000 to $7000 when this TV came out, recently price went down to around $2000. CALL THEM and ask FIX or COURT? For sure they fix it for you free of charge J Imagine how much would it cost them to recall all TVs which they know is faulty?
Enjoy

Apr 16, 2008 | LG RU-42PX10 42 in. HD-Ready Plasma...

Not finding what you are looking for?
LG RU-42PX10 42 in. HD-Ready Plasma Television Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...