Question about Sewing Machines

Open Question

Huskylock 901 stopped working. Has anyone else had this problem and found a solution?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dupina
  • 110 Answers

SOURCE: huskylock 901

Your problem may be twofold. One, the motorbelt may be too tight. Remove the sidecover and loosen the two screws on the motor. Adjust the belt tension in such a way that if you oress with your thump halfway between the motor pulley and the handwheel, the belt should give way app. 15mm.

Check if this help. If not, you need to wash your machine with white spirits to get rid of old oil and grease. Best done by a technician.

Posted on Nov 28, 2007

SOURCE: I need a Huskylock 901 manual

You can find a manual for the huskylock 901 on www.husqvarna.com website.

Posted on Dec 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anyone know what kind of motor, Servo or clutch, is in a HUSQVARNA huskylock 1002LCD? Also does it zig zag?


The information I found about your machine indicates it is a serger, not a sewing machine. A serger does not zig-zag.

Apr 18, 2017 | Husqvarna Sewing Machines

3 Answers

Huskylock 901


You can contact manufacturer and ask a cd version.

Apr 06, 2008 | Sewing Machines

1 Answer

I need a Huskylock 901 manual


You can find a manual for the huskylock 901 on www.husqvarna.com website.

Oct 09, 2011 | Husqvarna Huskylock Computerized 910

1 Answer

How to thread huckylock 901 serger


The picture diagram works the best for this, it tells you how to tread for every different stitch that you want to perform. You have to thread it in different ways for every stitch so it is difficult to tell you in writing. If you visit your local Viking dealer they would be able to make you a copy and I'm sure show you how right there.

Jul 26, 2010 | Husqvarna Huskylock Computerized 910

1 Answer

Husqvarna Huskylock 550D manual


I have a Huskylock 550d overlocker and the manual. Where do you live? email me on bmustert@gmail.com
regards Barb

Sep 16, 2009 | Husqvarna Sewing Machines

1 Answer

Huskylock 936 Motherboard Replacement


Any qualified Husqvarna technician should be able to order one for you. I would recommend that you have it installed to save yourself the heartache/break.
A main board, if I am looking at the correct one on the list, will run about $240.

Aug 15, 2009 | Husqvarna Huskylock Computerized 936

1 Answer

Huskylock 430 - STOP BLADE FROM CUTTING/REMOVE BLADE


Yes, you should be able to just push in on the blade and flip it up out of the way. Page 22 of the machine's handbook shows how to change the blades, so you should be able to remove them the same way.

Feb 13, 2009 | Husqvarna Huskylock Computerized 910

3 Answers

Huskylock 936


The manual is useless for beginner trying to thread the machine - and the DVFD is not much better.

Help

Sep 10, 2008 | Husqvarna Huskylock Computerized 936

1 Answer

Huskylock 901


Your problem may be twofold. One, the motorbelt may be too tight. Remove the sidecover and loosen the two screws on the motor. Adjust the belt tension in such a way that if you oress with your thump halfway between the motor pulley and the handwheel, the belt should give way app. 15mm.

Check if this help. If not, you need to wash your machine with white spirits to get rid of old oil and grease. Best done by a technician.

Nov 18, 2007 | Husqvarna Huskylock Computerized 910

1 Answer

HUSKYLOCK 901


Sometimes the thread tension needs to be cleaned out. I put a smal screw driver in where the silver tension guides are (between the dials) and open them up and wiggle them a little bit.
If the machine is cutting theads and or not catching threads on the back the timing may need to be adjusted.

What type of stitch are you trying to do?

Sep 02, 2007 | Husqvarna Huskylock Computerized 910

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...