An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: new printer won't print multiple pages.just 1 of 1
Change the driver setting, in the driver there is language the machine use it in order to communicate with the pc. check if you are using GDI or PCL or other driver language, change this setting to PCL or try to switch to other ones, and make printing test. you can do this from the machine too. if none of those works uninstall then install back trhe real driver. Good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Run the 1/2 print test. Print a few pages that have failed previously and as the printer is printing open the cartridge cover(top cover). Pull out the cartridge and look at the paper down below. If the page looks good, you probably need a new fuser. If the page is messed up you could have a bad transfer roller or another bad toner cartridge.
1. Check that you are using the latest print driver - from kyocera website. 2. If the issue is when you print pdf files then make sure you set the printer in KPDL Auto mode - check the print driver settings about this and the printer menu. 3.You may check if you have the latest firmware installed within the printer - print a service status page (Menu->Others->Service).
log into the web administration page as administrator
choose fax/scan tab
choose turn on/off/if tx fail
I chose both single and multiple destinations
if tx fails
Tested scan to email and fax to bad addresses and page printed as confirmation of failure
No pages printed for successful Tx
Note - you can still manually request confirmation at printer menu
start fax or scan to email