Question about Air Nailers

1 Answer

Need repair kit for central pneumatic 8 to 10 GA nailer stock no. 46240 .I need a B0600-2981 or the whle repair kit which ever I can get. thank you. kelly

Posted by on

  • 2 more comments 
  • Anonymous Apr 16, 2009

    I need repair kit for central pneumatic 8 to 10 GA nailer stock no. 46240.I have a breakdown of the Air Nalier 46240,I could email to you.

    obrmlr65@yahoo.com

  • bakcastle May 25, 2009

    I have the same gun & its leeking air out of the vent, the plastic parts at the top/inside are crumbleing

  • John Trevino May 11, 2010

    I have worked on many harbor freight guns but do not have a breakdown for the 46240. They change the model numbers very often but internal parts in many cases are the same. Please describe the part/parts that you need and the problem. I will try to help.

  • frank egan Jul 27, 2012

    I have modell 40115, Harbor Freight goes not care it and can notr help you . They can not give you central Pmeumatic home office #.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Read all your answers and here is a solution
i needed a manual for a 39092 nailer, old harbor freighs had no comment, to old. so i found a new nailer, scrolled to the manual section and brought it up.
>new< http://manuals.harborfreight.com/manuals/68000-68999/68023.pdf
i then changed the link to reflect my series
>mine< http://manuals.harborfreight.com/manuals/39000-39999/39092.pdf
mine was a 39series the new a 68. it appears they catalog by a 5 digit code. this got me a drawing and part list.

Posted on Oct 23, 2012

3 Suggested Answers

  • 1378 Answers

SOURCE: I have a central pneumatic

Central nailers are sold thru Harbor freight. They sell parts for their current models. Easy to check. Go to their web site and try to locate your model number. If found, look at the lower part of the page for link to manual and parts list including 800 number. If your model is no longer available at harbor freight, web site, ask the manager if they have returned nailers that you can use for parts. (they get a lot of tools back) If still no joy, post again with the parts that you need, maybe I can suggest an alternative. Good luck

Posted on Sep 22, 2011

  • 30 Answers

SOURCE: I have a central pneumatic 16 ga. nailer how do I

Central Pneumatic is a Harbor Freight brand, if parts are available for that item it would be though them. http://www.harborfreight.com/contact-customer-service Hopefully they can get you what you need. If not unfortunatly that nailer will be a throw-away. If you need to replace this nailer I would recommend spending the extra money and buying a name brand nailer like Porter-Cable or Bostitch, besides both being reputable brands, they offer factory service, parts and rebuild kits for their nailers.

Posted on Oct 10, 2010

  • 1378 Answers

SOURCE: i need a repair kit

Could not find parts listing for your nailer. It must be an old number from Harbor Freight. Thier nailers however are China copies or popular brands. Take the part that you need to a fastener company that deals in popular brands of nailers and with measureing tool in hand, ask them to try to match. I have had luck with some porter cable parts fitting central guns. Look here:
www.toolpartsdirect.com

find a porter cable fr350 nailer parts list or bostitch n80. It they look similar then parts for porter cable are sold thru Dewalt service center (for actually looking and measuring the part) .

Posted on Nov 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need parts for central pneumatic framing nailer model 94000


Unfortunately you will not find parts for Central Pneumatic - the company does not provide replacement parts.
It sounds like you have an exhaust valve that is plugged in the head - my suggestion would be to take it apart, clean it, replace any damaged O-rings with generic ones, and regrease it.

May 27, 2014 | Nailers Air Nailers

1 Answer

I have a central pneumatic 46240 air nailer. Can anyone tell me where to find a parts list for this.


Central nailers are sold thru Harbor freight. They sell parts for their current models. Easy to check. Go to their web site and try to locate your model number. If found, look at the lower part of the page for link to manual and parts list including 800 number. If your model is no longer available at harbor freight, web site, ask the manager if they have returned nailers that you can use for parts. (they get a lot of tools back) If still no joy, post again with the parts that you need, maybe I can suggest an alternative. Good luck

Aug 31, 2011 | Air Nailers

1 Answer

I'm looking for a repair center for pneumatic


The link below is Campbell Hausfeld repair center locator if you are looking for warranty center. For repair in general, try calling fastener centers in your area that sell nails for pneumatic nailers to contractors. They repair many brands of nailers and stock parts that may fit your nailer. Most repairs to nailers are actually cleaning, adjusting, lubing, and orings (universal sizes). General rool repair centers also repair nailers. If you are having a particular problem with a nailer, post the problem on Fixya for possible solutions. Good luck



http://www.chpower.com/webapp/wcs/stores/servlet/XServiceCenterLocator?storeId=10051&catalogId=10001&langId=-1

Jul 21, 2011 | Campbell Hausfeld Air Nailers

1 Answer

I am told by my nephew that my Central Pnuematic #47612 Air Angle Nailer needs a new HD Valve Piston and seal kit. Please advise if you have the parts.


Parts for Central Pneumatic nailers are usually available from HarborFreight.com. Go the their web site and find your nailer. At the bottom of the page for any nailer on their web site, you will find a link for parts sheet, then call the 800 number provided. If you cant find you nailer on their listings, it may have been discontinued. Call the their 800 number anyway to find parts. Good luck

Feb 14, 2011 | Air Nailers

1 Answer

Central Pneumatic item 94000 nailer. Need a top gasket and a plastick cylinder ring. Help!


Parts for central pneumatic guns are /should be available from Harbor Freight.com. Call their 800 number for information. If no joy, take your parts to Dewalt service center to try to match parts with Porter Cable framer. Porter cable parts are very close match to your gun. Good luck

Feb 08, 2011 | SK Paslode Sk312 Framing Nailer O`ring...

1 Answer

I need a repair kit for cental pneumatic, fraiming nailer # 46240, just need white round nylon disc inside **** end of nailer housing.


Could not find parts listing for your nailer. It must be an old number from Harbor Freight. Thier nailers however are China copies or popular brands. Take the part that you need to a fastener company that deals in popular brands of nailers and with measureing tool in hand, ask them to try to match. I have had luck with some porter cable parts fitting central guns. Look here:
www.toolpartsdirect.com

find a porter cable fr350 nailer parts list or bostitch n80. It they look similar then parts for porter cable are sold thru Dewalt service center (for actually looking and measuring the part) .

Nov 20, 2010 | Air Nailers

1 Answer

I have a central pneumatic 16 ga. nailer how do I get parts !!!


Central Pneumatic is a Harbor Freight brand, if parts are available for that item it would be though them. http://www.harborfreight.com/contact-customer-service Hopefully they can get you what you need. If not unfortunatly that nailer will be a throw-away. If you need to replace this nailer I would recommend spending the extra money and buying a name brand nailer like Porter-Cable or Bostitch, besides both being reputable brands, they offer factory service, parts and rebuild kits for their nailers.

Oct 09, 2010 | Air Nailers

1 Answer

I have a central pneumatic palm nailer leaks air


sounds like a bad o ring inside the housing .

Jan 11, 2010 | Air Nailers

1 Answer

I have a Central Pneumatic air nailer that has the seal crumbling. Seems to be a problem. Where can I get the kit to repair it? Thanks


You can call Harbor Freight and see if they have the repair kit available. 1-800-444-3353. Sometimes they change the models and will not have parts available. It may take up to 6 weeks for you to get your parts if they are available. Be prepared to wait. The parts will not be expensive. Depending on which seal you are talking about, you may have to order an assembly. I am directly talking about the trigger seal. This part seems to crumble the most. If you require more information please post additional information about your model and the seals you are requiring.

Sep 28, 2009 | SK Paslode Sk312 Framing Nailer O`ring...

2 Answers

Need Parts for Central Pneumatic Air Framing Nailer D1CN28/90


I have a Central Pneumatic Frame Nailer the driver will go down but not back up unless you disconnet air supply.

Aug 11, 2009 | SK Paslode Sk312 Framing Nailer O`ring...

Not finding what you are looking for?
Air Nailers Logo

Related Topics:

2,806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Nailers Experts

John Trevino

Level 3 Expert

1378 Answers

yoopertech

Level 2 Expert

121 Answers

james allen
james allen

Level 2 Expert

109 Answers

Are you an Air Nailer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...