Printer didn't print - Canon iP100 Portable Printer

Hello,
Most of the Canon printers form the PIXMA iP series block printing when one of the cartridges is empty. You have some options: 1) change the cartridges (with original or compatible) 2) buy a chip resetter and reset the empty cartridges chip so they can cheat the printer that they are full. This way you will clog the nozzles of your print head and the printer will become useless and won't print.
That's why I suggest you to but even cheap compatible cartridges and replace them.
Hope this helps. Alex

Some printers require you to have the color cartridges in them even when you are printing black and white. You usually can in your print options choose black and white over color.

Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

It seems to me a logical problem. Not hardware. Wich software are you using to print? CorelDraw? If so, in the miscelaneous tab in the printing settings (ctrl+e), check if the option "bitmap output" is not in the "grey scale" mode.

Assuming you already have the printer hooked up and installed, cause you didn't mention how to install it, just open the picture you want to print in Paint (windows) Or Acorn (Mac OSX) and File -> Print. You could also right click on the picture and click Print.
Hope this helps, Nathan Taylor
(Don't forget to rate)

This looks like either you do not have correct drivers, or that the drivers didn't install or didn't install properly Double check that you have the proper drivers. If you do, try reinstalling them.

Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

Print an empty word document, and if it still shows the dark lines on the edges the rollers are most likely caked with ink, and they will need to be cleaned.

Restart both your printer and your computer. It might finish the print job after you restart the printer and yes it will block any other print jobs.

restart computer