Question about Office Equipment & Supplies

5 Answers

Okidata pacemark 32410 Error Codes Power light on Alarm light blinking Gothic light on 15 light on What board is the fault

Posted by on

  • 4 more comments 
  • rainmrkt Mar 12, 2009

    oKIDATA Pacemark 3410 Error
    Carriage does not initilize properly
    Moves to left and stops error out
    lights below
    Alarm light blinking
    Power light on
    Gothic light on
    15 light on
    According to okidata manuals..these light pinpoints the board or power supply or motor to
    be changed do you know of the error lights service manual?

  • rainmrkt Mar 12, 2009

    What kind of level of technician are you?
    I wouldn't be paying 14.95 for you
    to tell me to take this unit to a printer
    shop?
    How rude

  • rainmrkt Mar 12, 2009

    Hey buddy
    This is a Okidata Pacemark 3410
    Which is a Matrix Printer no toners only ribbons
    Dont you know your okidata products?
    Are you on drugs????

    Please reply intelligently!!!!!!!

  • rainmrkt Mar 12, 2009

    What cardridge there is no cartidges on ribbon
    plus there are not paper in the unit caught
    in the paper paths or carriage paths
    Are you a okidat expert
    Please reply

  • rainmrkt Mar 12, 2009

    I thought you were the experts on Okidata
    Printers..
    What about my payemet to you
    Don't you have the service manuals???

  • rainmrkt Mar 12, 2009

    I need a service manual not a user manusl
    please advise

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

You can get service manual from the link below

Service manual


Hope this helps .

Posted on Mar 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Hi,
A blinking alarm usually means an hardware error of some type, such as an obstruction on the printhead, or a bad motor or such. 
When you have a blinking alarm light the other lights that are on will give you an error code that will tell you what the alarm means. You will need to look it up at Okidata.


Thanks, PREM

Posted on Mar 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 497 Answers

Removed & reinstalled all toner cartridges, and clean all the connections...

Posted on Mar 12, 2009

  • Yaz  S
    Yaz S Mar 12, 2009

    it cud also be a corrupt driver sir....
    turn the printer off and disconnect it..and when the CD software program asks you to connect the printer tru the usb port, do so and it should again work properly.
    Hope this helps.



    Thanks for using Fixya

    Have a nice day!

  • Yaz  S
    Yaz S Mar 12, 2009

    sorry sir..my bad..

    http://www.scribd.com/doc/4872127/oki-pa... check out this site

    Hope this helps



    Thanks for using Fixya

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Your printer need some servicing.u should take yur printer to service shop.

Posted on Mar 12, 2009

  • kishor khatri
    kishor khatri Mar 12, 2009

    ok

    open the front door then pul away your cartridge ten check thetre is ant any paper jam in printer.remove paper if ny of there.

    the refix the inkcrtridge.

  • kishor khatri
    kishor khatri Mar 29, 2009

    justg check there is not any paper jam in printer.

    Also refix ink cartridge.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 495 Answers

Normal 0 This doesn’t help fix all printers because each situation is different and in most cases we don’t have enough information to determine the fix. So hope this will provide some help.

Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Posted on Mar 12, 2009

  • Manoj Rout
    Manoj Rout Mar 12, 2009

    A blinking alarm usually means an hardware error of some type, such as an obstruction on the printhead, or a bad motor or such.

    When you have a blinking alarm light the other lights that are on will
    give you an error code that will tell you what the alarm means. You
    will need to look it up at Okidata.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp tv wont turn on


Sounds like main digital board fault. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jul 08, 2016 | Sharp Televison & Video

1 Answer

TV not power on. I replaced PS board 1-878-599-11. with new one, Green light on front cycles every 10-15 seconds. took back off and Relay RY6000 sets and resets. Any suggestions? no picture, no sound.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Oct 12, 2015 | Sony BRAVIA V-Series KDL-46V5100 46 in....

1 Answer

On power up, get 7 blinks of the power light. Disconnected the SC board, got 8 blinks.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Sep 02, 2015 | Televison & Video

1 Answer

Power board keeps clicking. Restoring power caused the power board to click twice, red indicator light begins to blink 8 times reflecting a fault with the BU board. Is the power board defective?


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Jul 18, 2015 | Televison & Video

1 Answer

No power 2 blinks and then 5 blinks


Error code '15'. Probably due to a faulty main board. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
25783614-g4gebv5ipy1iycpaj5cznlc3-5-0.jpg

Jul 14, 2015 | Sharp AQUOS LC-70LE757U 70" Smart LED TV...

2 Answers

Green blinking light


Sounds like it may be in standby. Try unplugging it and wait at least 15 seconds, then plug it back in.

Apr 08, 2015 | Televison & Video

1 Answer

Sony klv-v40a10e black screen green light on but 15 blinking red lights after a double power down from electric company


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Nov 20, 2014 | Sony Televison & Video

1 Answer

Olevia 537-B12 turns off after about 15 minutes and blue stand by light flashes steadily. If I switch it off(switch on back of tv) it will restart again and work again for another 15 min or so. Main b


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully.
If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Oct 27, 2014 | Televison & Video

1 Answer

Both lights are blinking and will not print


they call that flash codes or error codes. please count
count how many times the lights flash, here is what they mean

Alarm / Power light flashes orange 7 times consecutively (ink cartridge installed incorrectly)

Alarm / Power light flashes orange 5 times consecutively (Print Head Error)

Alarm / Power light flashes orange 4 times consecutively (Out of Ink Error)


Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error)

Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error)

Alarm / Power light flashes orange 16 times consecutively (This FINE Cartridge has previously been used)

Alarm / Power light flashes orange 15 times consecutively (FINE cartridge not recognized)

Sep 20, 2009 | Canon Pixma iP2600 Photo InkJet Printer

1 Answer

I have an Okidata Pacemark 3410 and the alarm light is blinking and will not print. i turn on and off and the alarm light just comes back on.


Normal 0 This doesn’t help fix all printers because each situation is different and in most cases we don’t have enough information to determine the fix. So hope this will provide some help.

Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Dec 29, 2008 | OKI Pacemark 3410 Matrix Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...