Question about Garden
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: samsung wf328aaw
According to Samsung:
Your Washer has tried to fill but
Make sure the water faucets are open all the
way. Check for kinked hoses.
Check the inlet screens on the fill hoses.
Of course, other things can cause the same code. Timer not supplying power to the water solenoids, solenoid water valve is defective, etc.
I would try hot fill, cold fill, warm fill. The above are the obvious.
You can download the manual at:
Posted on Nov 23, 2008
SOURCE: what does nf mean?
NF = Not Full
Is displayed when machine does not fill with water in the allowed time. Could be low water pressure at the feed pipe. Could be dirt clogging the inlet hose screen. Could be that the faucet valve is not fully opened.
Let us know of your success!!
Posted on Oct 12, 2009
Tips for a great answer:
Last Update date : 2015.06.17
The 4E or NF error code indicates a water inlet problem or the machine cannot feed itself with water. Make sure the source water tap is turned on and check the water pressure.
To troubleshoot this error further, follow these steps:
Note: The steps below generally apply to all types of Washing Machine (Top Load, Front Load, Washer and Dryer Combo)
Step 1: Turn the machine OFF.
Step 2: Turn the water tap OFF.
Step 3: Remove the water hose from the tap and dispense the water into a sink.
Step 4: Remove the entire hose.
a. Check for Kinks.
b. Check for Clogs.
Step 5: Check if water supply is good.
Step 6: Check, remove, and then clean the first mesh filter (Brush under running water).
Step 7: Check and clean the second mesh filter.
Step 8: Test the unit by turning it on and by performing a normal wash cycle.
Step 9: If the issue persists, unit may require service. Inquire about the Warranty and Service Booking procedures for the unit.
May 06, 2016 | Washing Machines
Jun 22, 2012 | Maytag Neptune MAH6500A Front Load Washer
Hello & Welcome to FixYa
NF error in your Maytag is
displayed due to no fill condition, when the washer tries to fill but is unable
to nf is displayed. Please check the water inlet valve for any clogs and
obstructions, you can also clean the inlet to solve the issue. Please get back to me if you have any
Oct 02, 2011 | Maytag Neptune MAH5500B Front Load Washer
Hello & Welcome to
NF error in your washer is displayed due to no fill condition,
when the washer tries to fill but is unable to nf is displayed. Please check
the water inlet valve for any clogs and obstructions, you can also clean the
inlet to solve the issue. Please
get back to me if you have any other questions.
Mar 06, 2011 | Samsung WF337AA Front Load Washer
Jan 27, 2011 | Maytag Neptune FAV6800AW Top Load Washer
Jan 04, 2011 | Samsung WF203ANW Front Load Washer
Oct 12, 2009 | Samsung WF337AA Front Load Washer
Oct 23, 2017 | Garden
69 people viewed this question
Usually answered in minutes!