Question about Televison & Video

1 Answer

TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

I turned on my Sony TV and it came on and could see my picture with horizontal lines then it was gone a few seconds later. It still has power and if you turn it off then back on it shows the same picture, then it gone again.off and again. any suggestions on what may be causing this problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,136 Answers

Blinking of standby light to Sony TVs are fault indications. Technically this is called blinking codes. From the number of blinks that occur at one time switch ON, you can get an idea about he faulty circuit location inside it. If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2350 posts now. All are related to electronic equipment repair help. Search the site by 'Timeslide' option. It will make search easy.

To know more about these blinking coded, visit the is site. It has details about blinking codes to many brand TVs. Pull up older posts.

Posted on Apr 22, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gopakumarg43
  • 74136 Answers

SOURCE: Sony FD Trinitron WEGA..won't turn back on TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of an

Visit this site for details. All information about this type of fault [2 blinks of standby light to sony Trinitron]; are described here in detail.
"Electro-help", is the name of the site.
Search for it on Google.

Posted on May 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kdl-32ex500 error codes


B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Nov 29, 2013 | Sony Bravia Kdl - 32Ex500 32 inch 1080P...

1 Answer

Sony TV turns off immediately after turning on


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits. Check this link to get more details about Sony Blinking codes.

Jan 13, 2013 | Sony FD Trinitron WEGA KV-20FS100 20" TV

1 Answer

Two times red led blink error


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Aug 20, 2012 | Sony KDL46EX500 46 in. HD-Ready TV

1 Answer

Kdl 32v4000


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Jun 20, 2012 | Sony Bravia KDL-32V4000 32 in. LCD TV

1 Answer

Sony kv-40xbr800 blinks two times


  1. Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.


Jun 09, 2012 | Sony FD Trinitron WEGA XBRKV-40XBR800 40"...

1 Answer

Sony FD Trinitron WEGA..won't turn back on TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of an


Visit this site for details. All information about this type of fault [2 blinks of standby light to sony Trinitron]; are described here in detail.
"Electro-help", is the name of the site.
Search for it on Google.

May 02, 2012 | Sony FD Trinitron WEGA KV-30HS420 30" TV

1 Answer

Two blinking on sart up


Your tV is Sony I assumes, and place the solution.
Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits

May 01, 2012 | Televison & Video

1 Answer

Sony kv36xbr800 won't turn on -standby blinks 2 times pls help


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Apr 22, 2012 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Tv in standby mode blinks 2 times then pauses and blinks again


Hello
Check your TVs power supply regulator section for any loose sodering points in it. The regulated voltage comes from it is more thatn normal. Check out all the soldering terminals. It is best to resolder all the suspected solder terminals by applying a little more solder, without making any solder bridge short in between adjecent solder points. The fault symptom as reported by sony is:-Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.
Check for any short circuit in the secondary section of the SMPS power supply section. Check the horizontal output transistor for collector to emitter short.
OK.

Aug 07, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

My 25 inch Sony CRT TV turns off by itself and blinks twice several times.


Hello
Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits. Its power supply regulation board has the trouble. Check for any loose soldering points in it. Resolder most of the suepected solder terminals by applying a little more solder. This is a common fault to Sony power supply system board. OK

Jul 07, 2011 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...