Question about E-Machines eMachines Desktop PC

2 Answers

I have a Emachine W3650 And it wont start up

When I turn it on I get a Error message that says sorry for the problem but windows didnt start proplery and then has the safe mode,safe mode with networking,safe mode with command promp, and when i tryed any of those nothing happend i got the same message Emachine's dont even help they dont listen to you they told me to do alot of thins and none of that seemed to helpedd i called the tech support 6 days in a row and the all told me to do the same any suggestons ?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 166 Answers

Insert your windows cd and set computer to start from cd. When prompted to, hit a key to boot from CD. Let Windows start the install (relax it is not really installing anything) when it gets to the prompt, tell it you want to Repair an existing installation. Then pick the prompt that gets you the recovery console. When you get to the prompt type CHKDSK /R and let it run. Sometimes this can take an hour or more depending on the size of your drive. Do not get worried if the percentages complete go backwards, like from 70% back to 50%. Sometimes it will go back and fix files. Hopefully you will not get the error that there are unrecoverable errors. This has worked for me on about 90% of the hard drives that I received the inaccessible boot device or had a corrupt installation of windows. Sometimes you cannot recover from this unless you get really lucky. I had one instance where I did this and CHDSK recovered the files but did not name them the same as before and it renamed the Windows System file FOUND001. Luckily I had another similar computer to insert the drive in as a slave and compare file sizes to and when I renamed them the correct filenames the system started up and allowed me to retrieve my data. I ended up reloading the machine after I got my data off. This whole problem happened due to a power interruption during bootup.

Posted on Mar 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Just reinstall the operating system, Ur O/S is totally corrupted,.......... the Only Final option.....

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello...??.....I need help with my emachine T-6520


Go to this web link:
http://technet.microsoft.com/en-us/library/bb932139.aspx
Download the relevant file WindowsUpdateAgent30-x86.exe
Install the Windows Update Agent and then try the Windows update again.

Jan 19, 2014 | E-Machines eMachines Desktop PC

2 Answers

Where can i get a system recovery cd for emachine w3650 pc


You might be able to get a recovery disc from eMachines

Apr 11, 2013 | eMachines PC Desktops

1 Answer

Wont boot up properly looking to reformat


Check and see if there's a Disk in your CD/DVD ROM Drive. I assume there's on in there that has some bootable files and your computer see's it and is asking to boot from it. Usually it will say something like "Press any key to boot from CD" so if you don't want boot from that CD just don't press any keys.

Feb 07, 2013 | E-Machines eMachines Desktop PC

1 Answer

How to reset emachine w3650 to factory settings


There is a way...... go to START then click ALL PROGRAMS then click SEARCH then in the search box type RECOVERY then click on the third one that it finds n follow the direction .....it will walk you threw it

Mar 31, 2012 | PC Desktops

1 Answer

I have emachines model W3650 and want to know how to set back to factory setting.


(1) Go to start menu(2) Click on all programs(3) click on Emachine(4) click on Emachine recovery management(5) Click on restore on the bar across the top(6) click on restore to system factory default
Some emachines can be restored by pressing ALT+F10, but not sure on your model. Give it a try if you can't restore it to factory defaults using Emachine recovery management.

Feb 05, 2012 | E-Machines eMachines Desktop PC

1 Answer

How to download a full system recovery file on emachine model W3650?


(1) Go to start menu(2) Click on all programs(3) click on Emachine(4) click on Emachine recovery management(5) Click on restore on the bar across the top(6) click on restore to system factory default
Some emachines can be restored by pressing ALT+F10 as you turn on the computer, but not sure on your model

Feb 05, 2012 | E-Machines eMachines Desktop PC

1 Answer

I have a Emachine W3650 And it wont start up what do i need to do ?


If it's completely dead when you turn it on, you probably have a bad power supply. They're fairly easy to replace and not too expensive unless it's proprietary to your machine, some are. Most towers will take a universal type power supply.
Also make sure it's plugged into a good power source, power strips and things can be flaky at times.

Mar 05, 2009 | E-Machines eMachines Desktop PC

3 Answers

Emachine w3650 recovery disks....


The recover section will allow her to restore from the recover partion as long as the recover partition has not been removed.

Jan 09, 2009 | HP Compaq Presario SR1620NX...

1 Answer

Emachine


Apears that your installer CD has got corrupt. Try installing from a fresh copy of Windows 98 (preferably Windows 98 Second Edition).

Sep 11, 2008 | PC Desktops

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...