Question about Routers

1 Answer

The router does not detect the working Internet connection

It was working fine till two days back it stopped working. I have tried to uninstall and reinstall but I get a message that there is no internet connection whereas the connection is working directly andI am communicating througu the same

Posted by on

  • damiandzitko Mar 22, 2009

    i have a problem the Netgear RangeMax WPN824 Wireless Route wont work i just got it and im installing it and its just a power light a check light next to the power liht and a lad port light

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 611 Answers

Check the dns value ip address of the isp and change the ip address of the router is default is 192.168.1.1 change in different series then check the friewall disable it any proxy server change it then check you get it and reconfigure it

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My zyxel router stopped working all of a sudden. it was working absolutely fine until suddenly, out of the blue. Not detecting or connecting to internet at all. Help me.


Hi i have the same problem with Zyxel router. I have tried to reset it, to unplug and whait, to insstaal new drivers but Zyxel router is still not wokring properly. It sometimes work for a half day and sometimes it just unconnects the internet 5 times in a minute.. I went where i bought it and they gived me anoder zyxel router, the same, but i still have the same problem.

Jul 18, 2011 | Zyxel Prestige 320W Wireless Firewall...

1 Answer

I have a DIR-600 router to connect my Cable modem and use wireless connection to connect to the internet. It was all working fine till my modem LAN port got damaged somehow.I have changed the modem and now...


Try following this order before you connect your computer to the router.
power off all your equipment (cable modem & router & your computer's wireless card)
first, power on the cable modem, give it some time to boot up and get an IP from the ISP, say 30 secs.
then, power on the router, again, give it some time to boot and obtain its internet IP from the cable modem
finally, enable wireless on you computer and connect to the router.

if this doesn't solve the problem try resetting the router to factory defaults by pressing the reset button at its back for about 10 seconds with the router powered on.

This your router's manual it may turn handy:
http://global.dlink.com.sg/site_support/DIR-600/Manual/DIR-600_B1_Manual_v2.pdf

good luck

Jun 12, 2011 | D-Link DIR-600 Router

1 Answer

I have a netgear range max, it has been working fine. Just last night nothing wireless in my house works. Cable modem works. Power light on netgear box is green. "i" icon is flashing green,...


Hi,

You need to reset and reconfigure router
please follow the steps to reconfigure router


RESET THE ROUTER:

1. Make sure router is connected to power supply and is on while you perform the task below. At the rear panel of the router, near the antenna, there is a very small round pinhole that contains the reset button.
2. Using a pen/pencil/paper clip, hold the reset button for 60 sec. so that the test light starts flashing.
3. After few seconds when the test light stops flashing. Turn off the router and turn it back on after a couple of minutes.



RECONFIGURE THE ROUTER:
1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
4. On the basic setting page scroll to the bottom and click on Apply.
5. When prompted for Username and Password, please enter 'admin' for the Username and 'password' for Password.
6. Click on lan ip setup under advanced.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser like Internet Explorer, Mozilla Firefox or Safari.
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. Click Apply.
17. Logout of the router.
18. Open up another browser window and try to access internet.


Regards,
Prakash

Apr 08, 2011 | NetGear WGT624 Wireless Router

1 Answer

D-Link Router not working suddenly.


Can you connect to the internet via an ethernet cable to the router, or even to the modem???
Are the computers set to automatically detect settings in internet options.
They may have been reset due to an update
Control panel / internet options / connections / lan settings / tick the box for automatically detect settings

Jul 22, 2010 | D-Link DIR-615 Router

1 Answer

I have a Netgear WPN824v3. It seems to be functioning normally except I can't APPLY any changes. I get a "wait a moment" and repeated looking-up of routerlogin.net, but no response. Viewing the router's...


Hi,

It seems that you need to reconfiguer router
please follow steps to reconfigure router

RESET THE ROUTER :
1. At the rear panel of the router, near the antenna, there is a very small round pinhole that contains the reset button.
2. Using a pen/pencil/paper clip, hold the reset button for 60 sec. so that the test light starts flashing.
3. After few seconds when the test light stops flashing Power cycle the unit.

1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
4. On the basic setting page scroll to the bottom and click on Apply.
5.Login to the router (Username = admin Password = Password)
6. Click on lan ip setup under advance.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. click Apply.
17. Open up another browser window and try to access internet.

hope it will resolved your issue
Thanks for using Fixya

Jun 09, 2010 | NetGear RangeMax WPN824 Router

1 Answer

When i hookup my netgear wgr614 iget on connectivity. If i run modem direct to computer connect fine how to fix was working fine till last night


Hi,

It seems that router need to reconfigure and once you reconfigure router i am sure you would be able to resolved issue.
Please follow steps to reconfigure router
1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
4. On the basic setting page scroll to the bottom and click on Apply.
5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
6. Click on lan ip setup under advanced.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. Click Apply.
17. Logout of the router.
18. Open up another browser window and try to access internet.


Thanks for using Fixya

May 13, 2010 | NetGear WGR614 Wireless Router

1 Answer

D-Link DIR-300 Router not working properly


Try to configure your router again, maybe that will solve your problem.

Jun 24, 2009 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

Wireless local only


You should try to uninstall and reinstall the driver for your wi-fi adapter on your laptop. Also, you can try to connect to a different wireless network like a hot spot or coffee shop for you to determine if the router is faulty or the built-in wi-fi adapter of your laptop.

Nov 01, 2008 | Linksys Routers

2 Answers

When i try and set up my wireless router it tells me the router is not detected


Please ensure that you have the router connected via the blue cable directly to your computer's ethernet port. You should be able to interface into your router's config page by typing in 192.168.1.1 in the web browser expolorer bar. Hope this helps, however, please do get back to me should there be anything else. Thanks.

-Technomancer

Jun 02, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

I purchased a wireless router model wrt110 early this month, installed and working fine unitl last night had to uninstall and tried to install it back i get to the installation to figure the router and i...


NO need to worry i will provide a valid trouble shooting steps
I think u have used the set up cd..dont use the Cd..i will give u the exact steps..

U dint specify that whether u r using the cable Internet or DSL!!



1,connect the blue cable between the computer and the router(any 1 of the 4 ports in the router)

2,connect the other Ethernet cable between the Modem(came from ur internet people) and the Router's Internet port(standalone port at the back of the router)

3,In the rear panel of the router u can see the reset button.with the help of the paper or ball point pen,press it hardly and hold it for 1 minute..

4,Now turn off ur modem and the router..wait for other 1 minute..

5,turn onn only the modem and wait till all the lights lit.now turn on the router and wait till the power light is solid..open the internet Explorer it should work..


STeps for DSL Connection(verizon)

1,connect the blue cable between the computer and the router(any 1 of the 4 ports in the router)

2,connect the other Ethernet cable between the Modem(came from ur internet people) and the Router's Internet port(standalone port at the back of the router)

3,In the rear panel of the router u can see the reset button.with the help of the paper or ball point pen,press it hardly and hold it for 1 minute..

4,Now turn off ur modem and the router..wait for other 1 minute..

5,turn onn only the modem and wait till all the lights lit.now turn on the router and wait till the power light is solid..

6,open internet Explorer and in the address bar..enter as 192.168.1.1..it will prompt for a user name and password..leave the user name blank and the password will be admin.

7,linksys set up page will open..there u can see local ip address which says 192.168.1.1.
please change it as 192.168.2.1..click on save settings at the bottom of the page..
it will say like "settings are successful please release and renew the ip address".click continue or OK

8,Now turn off ur modem and the router..wait for other 1 minute..turn onn only the modem and wait till all the lights lit.now turn on the router and wait till the power light is solid.

9, Open Internet Explorer and it shuld Work....

TRY IT AND GIve me ur feedback

May 31, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Routers Logo

Related Topics:

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...