Question about Keurig B60 Special Edition Brewing System B60
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I just bought it Keurig
I have the same one. fill side tank with water and close down place to put coffee. it should **** up some water. Than in a few it will say ready to use. Hope this helps....
Posted on Jan 26, 2009
SOURCE: New Keurig B60 stopped working!
I had the same issue. I now believe that there was some "vapor lock" type issue. Mine would say the same thing, and i could hear the pump running, but the water level was not changing in the reservoir. I unplugged it, removed the reservoir, let it cool, then tipped it on its back for a few minutes, then on each side. Truthfully I was trying to see if there was some kink in the tubing. Couldn't find a problem, so set it back up and it runs great again.
Posted on Jan 02, 2010
You have to remove teh 5 screws from the bottom plate on the unit and they there is a small translucent corrugated hose fastened with a small ty-rep. Remove this hose and simply drain the stainless tank to the sink and replace the hose over the barb, slide the ty-rap back in place and it is EMPTY. Takes ten minutes start to finish. Phillips screwdriver and needlenose pliers are all that is needed.
Posted on Dec 03, 2010
Tips for a great answer:
Mar 23, 2013 | Keurig B60 Coffee Maker
on Apr 04, 2008 | Keurig B60 Coffee Maker
Mar 20, 2013 | Keurig Special Edition B60 Coffee Maker
Sep 01, 2011 | Keurig B60 Coffee Maker
May 24, 2011 | Keurig B60 Coffee Maker
Sep 22, 2010 | Keurig B60 Coffee Maker
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: