Question about Systium ATX 545 ATX Mid-Tower Case

1 Answer

Not reading scsi drives: 1 hard drive, 2 cd roms

Need to know type scsi controller/adapter on motherboard, which scsi drivers to install and how to install os on scsi hard drive.....

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

You haven't mentioned what motherboard model you have and since it's hard for you to identify the scsi adapter, you're pretty much asking us to tell you about the birds and the bees or starting from ground zero...

this is a lot of information that you need at once.
if you aren't savvy with computer electronics, I suggest taking the pc to a pc technician and paying him a few bucks to interview him/her and give you a lot of information. you should physically be on site with someone that can optically show you how to deal with pc hardware before you begin tinkering with it on your own.

Posted on Mar 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lightscribe dvd probems




you failed to provide a problem? so a guess

make sure all leads that are attached to your cd/dvd have secure connections and are not faulty or just replace them they could be faulty ?


you might have to physically unplug the cd/dvd drive restart your computer this should activate the found new hardware wizard

Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer

Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.


hope this helps

Jun 06, 2012 | HP Sata Dvd/rw Lightscribe 447310-001...

1 Answer

My pc wont turn on and i've cleaned uot like 1inch thick dust. it was workig fine untill i left 2 nights ago i came bk from holiday and dont work. if the room was damp will that effect it?


Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your "((MOTHERBOARD TO YOUR HARD DRIVE))" make sure they have a secure connection and are not faulty or just replace them they could be faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error even something as small as a faulty electrical extension or fan lead can cause this problem

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly

a motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working

also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets
hope this helps you

Sep 18, 2011 | Packard Bell (ATXMH28AP) Full Tower Case

1 Answer

One of the bootable device has not been found.


your operating system is looking for somewhere to boot from

make sure there no disks in your drives

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your "((MOTHERBOARD TO YOUR HARD DRIVE))" make sure they have a secure connection and are not faulty or just replace them they could be faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error even something as small as a faulty electrical extension or fan lead can cause this problem

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly

a motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working

hope this helps you

Sep 10, 2011 | Computers & Internet

1 Answer

I built a computer for my aunt using an Intel motherboard, Intel processor, 2 x 500MByte DDR3 RAM in a Blue Ninja case purchased from Tiger Direct. The computer worked well for more than two years then...


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive
Test the leads that attach to your ((hard drive from the motherboard)) or replace all the leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your ((motherboard to hard drive))
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error


hope this helps

Jan 16, 2011 | RaidMax Ninja Case (RDMXNJACAS)

1 Answer

I have a Gigaware Hard Drive enclosure, When I plug it in to my computer it showes up in the device mananger but I am not able to access it as a drive to get the information off of it. I had it pluged in...


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your motherboard to your hard drive make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

or
control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
or it might be a registry problem
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps







Dec 06, 2010 | Computers & Internet

1 Answer

I need help installing a cd drive in an Antec Sonata III 500 computer case. How do I do it?


Unplug the power from the computer. Open the case cover. Carefully remove the placeholder on the front of the case where you wish to install the CD drive. Make sure you have the proper ribbon cable for the type of drive you are installing and that you know where to plug it into the motherboard (consult your motherboard manual).

Use the screws provided to secure the drive to the chassis rails (make face of drive flush with front of case). Attach an available power supply connector to the new CD drive. Close the cover.

Dec 04, 2009 | Antec Sonata III 500 - mini tower - ATX ...

1 Answer

HELP ME


hi there my friend,

we have the hard way and then we have the easy way...

the hard way is to bootup with your bootable xp cd .follow the installation guide ..then.put in your key when you get the chance to ..and finish the installation. then apply service pack 2 to your installation .. and you're done...

the easy way would be to make a Slipstream Windows XP Service Pack 2 CD....which you can use each time you need to fix your system.

1 - Download the (full) "Network Install" of the Service Pack (English version [266 MB]), and save it to a directory (folder) on your hard drive (in my case D:\XP-SP2). Other languages can be downloaded from the Microsoft Download Web site.

Note: do not use spaces in the folder name!

2 - copy your Windows XP CD to your hard drive. Just create a folder (I used \XP-CD), and copy all the contents of your Windows XP CD in that folder.

3 - , open a Command Prompt (Start > Run > cmd), and go to the folder where you downloaded SP2 (cd \foldername). Type the command: servicepack filename /integrate:drive/path. In my example the command is WindowsXP-KB835935-SP2-ENU /integrate:D:\XP-CD.

Extract SP2 files

If you get the error:

This service pack can't be integrated error

This is caused by the fact that your Windows XP CD contains updates that will be automatically installed when you run setup. This type of CD's will usually be from larger OEM suppliers (like Dell, HP, or others).

You cannot use this type of CD to create a slipstreamed SP2 install.

First, the files will be extracted, and next they will be integrated in your Windows XP files:

Updating Windows Share

When ready, you should get a confirmation. Windows XP Service Pack 2 has now been Slipstreamed into your original Windows XP files.

Slipstream Completed


Creating a Bootable CD

For this part I used IsoBuster and Nero Burning ROM 6

After you install IsoBuster, you can choose to use only the product's free functionality for what we want to do, IsoBuster will look like the image below (you need to have your original Windows XP CD in the CD-ROM drive).

Start to extract the boot loader from the original Windows XP CD. Using IsoBuster, select the "folder" Bootable CD, and right-click Microsoft Corporation.img. From the menu choose Extract Microsoft Corporation.img, and extract it to the folder on your hard drive where you have your Windows XP files (D:\XP-CD in my case).

Extract Boot Image

Next, start Nero Burning ROM, and choose CD-ROM (Boot) in the New Compilation window. On the Boot tab, select Image file under Source of boot image data, and browse to the location of the Microsoft Corporation.img file. Also enable Expert Settings, choosing No Emulation, and changing the Number of loaded sectors to 4 (otherwise it won't boot!)

Nero Boot Settings

The ISO tab should be configured correctly as shown below:

Nero ISO Settings

If you have an older version of Nero you won't have the option Do Not Add ";1" ISO file version extention under Relax ISO Restrictions. You won't be able to boot your new CD, so update Nero!
You can configure the Label tab to your liking, I would however recommend that you keep the Volume Label the same as on your original Windows XP CD. Here are some (English) Labels:

* Windows XP Professional: WXPCCP_EN
* Windows XP Home: WXHCCP_EN
* Windows XP Professional OEM: WXPOEM_EN
* Windows XP Home OEM: WXHOEM_EN

Nero Label Settings

Next press New, and from the File Browser window, select the files and folders from your slipstreamed location (in my case D:\XP-CD). Now drag & drop the selected files in the ISO1 window.

Copy Files

Next, burn your new CD.

Burn

You now have a Bootable, Slipstreamed Windows XP Service Pack 2 CD!

Apr 28, 2008 | Computers & Internet

1 Answer

Relatd to slow working


These are two different problems...
1. most likely you have loaded too many programmes in the startup...uninstall the unwanted programmes...and clean the registry by registry cleaner.... clean your c drive or the drive in which OS is loaded by system tool...disc cleanup (in accessories)

2. increase your RAM if you still want to use all the programmes you have loaded.

3. Use a cd rom cleaner disc to see it the rom stars reading...or else you will have to replace the CD Rom

Apr 06, 2008 | Computers & Internet

1 Answer

Re: lg tower xp install


Hi,
FDD Floppy-Disk Drive.
It would be advisable to go to the motherboard Manufacturers site. And download the setup or user manual for this Board.
The White or black plastic jumper blocks i,ve refered to, are on the back of the Actual CD/DVD Rom Drive. Located at 1 end. this should be set to Master or Slave. diagram of settings usually printed on top of the drive. I dont know whether you have an IDE Drive ( 40-80 strand ) wire connecter.
Or sata drive connectors. 1 single red cable from motherboard to drive.
please bear in mind, this site is designated to solve technical solutions.
i,ll help all i can, but if your not technical minded, perhaps this is a job for someone more competant than yourself. no disrepect intended.

regards mike @ compurepair.

Mar 30, 2008 | Computers & Internet

1 Answer

Installing 2 hard drive


if ur hard drive is IDE port then
attach the 1st end of ide cable to the motherboard and second end of ide cable {IDE1}to the hard disk {make this hard disk MASTER by change the jumper settings }
attach the second hard disk to ide cable {IDE 2} make this hard disk SLAVE by remove the jumper from hdd

Mar 20, 2008 | Computers & Internet

Not finding what you are looking for?
Systium ATX 545 ATX Mid-Tower Case Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Systium Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14088 Answers

Are you a Systium Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...