How to empty printer buffer - Office Equipment & Supplies

My guess would be that the quick printing at first is because the print job get spooled into a buffer and when the buffer is full the print job starts. The printer begins printing and using the buffer data as the computer continues to process the job and supply the buffer. At some point the buffer gets empty and the printer is waiting on the computer for more data, causing the slowdown. This rarely happens anymore, unless you have a very old printer or very old computer, as most printers have a rather large internal buffer memory. You may be experiencing issues with connectivity if the printer is being used wirelessly. Check to ensure that the wireless signal is strong to ensure maximum data throughput capability.

try to reinstal the driver ,first unistal it

Please reset the printer by removing the power cable and waiting for 10 mins.

empti the printer buffer at PC

Try upluging the printer, your buffer could of been full and lost connectivity until it was empty.

One easy way is to remove the paper tray and then purge the print queue after a restart. You will also have to cycle you printer power for about 2mins to empty the print buffer after you have cleared the print queue.

Get your printer little bit serviced...and this problem you are tell about seems to be of the buffer device in the printer it needs to be replaced...

Power up printer ,then Press&hold(STOP/RESET)button for 5 sec. Then restart printer.
Go to MP NAVIGATOR.Select SCAN/IMPORT,>OPEN SCANNER DRIVE>ADVANCE MODE>SIMPLE MODE.>select OK.I think it fix your problem.

hello
Plz check the buffer of ur printer if it contains any information select all and delete it and empty the printer queue.

thank u

the manual sholud tell you this - check out the PDF file on the software disk