Question about Panasonic Televison & Video

2 Answers

Panasonic TH-42PX60U plasma TV: red blinking light

Red blinking light. Blinks 10 times and then repeats. Power off and discount HDMI cables worked for several weeks but the problem is now persistent. Service shops in town will not repair on-site - must bring it to their shop. - really inconvenient. TV is 2 years old.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Are you using a PC to feed a signal or maybe a cable with an adapter?
I had the same issue when I used one of the rear HDMI ports to show a PC display. Apparently there is a software difference between the rear and side/front ports. Inputting the PC through the side HDMI port has solved the problem for me (so far!)

Posted on Apr 21, 2009

  • Bob  Adam
    Bob Adam Dec 06, 2011

    This is a really old post but I've got an update on it, not a solution, but something I found. The power supply on the unit has a knock off Nicicon Cap, 330UF 200 V in the center. Mine was buldging badly. I replaced it but still have the same problem. six flashes repeating. Everything else seems fine.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Panasonic TH-42PX60U plasma TV: red blinking light

Posted on Aug 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TH-42PX60U power red light blinks 3 times


The blinking is a symptom of power supply failure

Mar 22, 2013 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

Plasma 50 inches dont turn on


The power supply board is dead.Tries the websites like Shopjimmy.com,Ebay.com to buy the refurbish power supply board for the replacement.

Jun 22, 2010 | Panasonic Viera TH-50PX80U Plasma TV

1 Answer

I have the same problem Panasonic Plasma TV wont come.


Alot of times capacitors on the power supply circuit board will go bad. They will bulge/dome or dry up which will cause this problem. Bad caps dont hold a charge, which is needed to maintain a voltage. The circuit board is two sided which makes replacing the caps difficult, and the board can be damaged and have to be replaced. Taking it to a repair shop may be cheeper and safer then doing it yourself. Having two-six caps replaced is a lot cheeper then a new board.

Aug 15, 2009 | Panasonic TH-42PX60U Television

1 Answer

My panasonic th-50pz800u won't power up. The power lights blinks 10 times then pause 10 times then blinks a again?


A red light blinking 10 times means that a video board has gone bad. Contact Panasonic to see if they will help you out.

Jan 04, 2009 | Panasonic Viera TH-50PZ800U Plasma TV

6 Answers

TH-42PX60U red light blinks 10 times wont come on


On a Panasonic TV the 10-blink error code can sometimes be caused by low voltage running through an HDMI cable, particularly from a Media PC or some video game consoles. Try disconnecting any HDMI cables and unplugging the Television for 30 seconds, then power it on without the cables attached.

If this works, connect the cables to the front panel (usually HDMI-3) which uses a different controller board.

Dec 08, 2008 | Panasonic TH-42PX60U Television

3 Answers

Power light blinks 10 times


You have the same problem i have. My Tv just did the same thing 3 nights ago. I unplugged the set, and let it sit ofr about 6 hours, and then tried it again. It turned on and played, but repeated the problem after about 20 or 30 minutes. So far all my research has led me to believe that its a power supply issue. Problem is, there are 5 boards in the tv with seperate pwer supplies, and the 10 red flashes indicate that its all of them. :-(. Im shopping for a new TV, and It wont be a panasonic this time.

Feb 24, 2008 | Panasonic TH-42PD50U 42 in. Plasma EDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...