Question about Dynex DX-E401 Router

1 Answer

Can't get to 192.168.2.1 anymore. why?

Can't get to 192.168.2.1 anymore. why?

I accidentally hit the 'security sync' button on my dynex WEGRTR wireless router and now I get an error in my connections list beside my dynex connection: the settings on this computer do not match the requirements of your network. I can't find any settings that are different from before, so I went to the site above, like I used to do, and it's not there!! How am I going to get connected again? And is there something I've missed on my computer. I have re-checked the connection types and the security key. Please help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to find the reset button and press it with a needle head, untill all setting are reset. Power cicle your router and if you are using a modem. Try again. You shouldn't have any orange lights on your router. Now go to your computer, and you will find your wireless rounter name, try to connect to it, and it will ask you for your pin number. You can find the pin in the bottom of the router. After typing the router's pin, it will ask you for the security settings and stuff. Once done, you should be good to go.

Thanks,

Wais

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset the box to change the password


http://www.manualowl.com/m/Dynex/DX-wegrtr/Manual/197670 Page eight will tell you how to reset the router to default settings, that includes password and everything else.

Jul 31, 2011 | Dynex DXWEGRTR Router

3 Answers

How do I get the security key for my dynex dx-wegrtr without the manual


Log into the routers interface usually 192.168.1.1 or check the default gateway address with the ipconfig command in the command prompt. Then navigate to the wireless security tab and the key should be listed.









spydrt_10.jpg

spydrt_11.jpg

Mar 05, 2011 | Dynex DXWEGRTR Router

1 Answer

How do i put a security lock on my dynex DX-WEGRTR router


You should be able to do it from whatever computer you first set it up with under its settings.

Jan 12, 2011 | Dynex DXWEGRTR Router

1 Answer

Wireless 'n' router


Please reset the Router to restore it to factory settings. Please locate a small pin point whole, reset button near the Ethernet ports of the Router and press it for 10 seconds. Once you reset the Router, please login to the Router and change the Router login password under Administration tab.

Please follow the steps mentioned below to secure the Wireless Network.
  • Please open the Web browser, type 192.168.2.1 and press enter.
  • Please enter the User Name "admin" and leave the password blank.
  • Please click on Wireless section and click Security.
  • Now, you can pickup any of the Wireless Security like WEP, WPA, WPA2 etc.
  • Select the Wireless Security encryption type and save the settings.
  • The Wireless is secured now.

Good Luck.
Thank you for contacting.

Jun 07, 2010 | Dynex DXWEGRTR Router

1 Answer

Dynex router blocks connection of Samsung BD-P1600 Blu-Ray to Net


I'm not familiar with that particular router, but all of them are about the same. You can go in and edit firewall settings to allow a particular IP address to have access. Don't disable the firewall completely, just set it to allow that I.P address to have full access.

Nov 15, 2009 | Dynex 4-Port Ethernet Broadband Router...

1 Answer

Can  Dynex 4 Port Router DX-E402 be used to connect internet on a notebook without using cable to notebook?? i.e. Can it be used like a wireless g router??


Unfortunately, the DX-E402 is not a wireless router, so it can not transmit its signal without a physical cable connecting the router to your computer. If you want a wireless router that can also connect to your ISP, check out the Dynex Enhanced Wireless G Router:

http://www.dynexsupport.com/product/?pid=DX-WEGRTR

Nov 28, 2008 | Dynex 4-Port Ethernet Broadband Router...

1 Answer

RUN CD


You can download the software from here:
http://www.dynexsupport.com/product/?pid=DX-WEGRTR

Sep 07, 2008 | Dynex Routers

2 Answers

Performance Issues After Replacing Router


try setting the mtu to 1492 and see if this improves it

Mar 08, 2008 | Routers

Not finding what you are looking for?
Routers Logo

Related Topics:

811 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Routers Experts

Willem.
Willem.

Level 2 Expert

345 Answers

Richard Finch

Level 3 Expert

397 Answers

CKsystems

Level 2 Expert

72 Answers

Are you a Dynex Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...