Question about Sony Handycam DCR-HC30 Mini DV Digital Camcorder

2 Answers

LCD not responding to touch. I can get to the calibration screen, and it will respond to touch, but it never exits the calibration screen.

Posted by on

  • 1 more comment 
  • Anonymous May 11, 2009

    i cant get the touchscreen to work
    dcr sr45



  • dr_mitrardal May 23, 2009

    i have the same problem, anybody has any solution?

  • David K Apr 02, 2012

    Same thing is happening to me: calibration screen responds to touch but never exits, and lcd use outside of the calibration screen doesn't respond. A lot of Fixya responses say I need to replace a cable or the lcd itself, but if that was broken then the calibration screen wouldn't respond, right? Has anybody found a solution to this?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

How can i calibration my mini dv screen its model(dcr-hc26)?

Posted on Feb 16, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm also having the same issue where the x accurately jumps when touched, but no matter how many times I do it, it never leaves the screen. I've calibrated it before and it worked fine, but now it just keeps jumping around. They're supposed to be very expensive to have serviced so is there anything I can do on my own, touch any other special buttons, reset the camera, etc?

Posted on Jan 29, 2012

2 Suggested Answers

omtronixom
  • 172 Answers

SOURCE: lcd problm

there is 2 types of fault for this....one lcd cable damage or touch panel damage if it is you have replace LCD

Posted on Mar 01, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Touch screen not responding


Which model of Ricoh are we talking about here? If touch screen is not responding before replacement, re-calibrate touch screen or replace it. I can help you with the calibration code if you require. If the touch screen is not responding after replacement, check whether the replacement lcd display panel was installed reverse as the connectors will not have contact.

Mar 12, 2014 | Ricoh Office Equipment & Supplies

1 Answer

Touch screen not working


The same thing happened to mine all you have to do is unplug you're car battery then plug it back up then it should work but first u have to calibrate before it works should calibrate very fast

Feb 15, 2013 | Soundstream VR-738NB 7-Inch Lcd...

2 Answers

Samsung a897 touch screen not responding at all


Hello there,

There are two major reasons that could be causing the touch screen not to be responding. The first is if the phone fell and the sensor board got bad, and the best solution is to replace the sensor board. To replace the sensor board is quite sensitive so i will strongly advice you seek advice from a specialist that can assist you with that. But if you intend to fix it DIY way, then you can ask and i will direct you through the steps.

On the other, it might be the screen is weak and needs calibration. To calibrate the screen depends on the type of phone it is. I will advice you go through the user manual for the steps to calibrate the screen of your phone. If you cannot get any response from the screen, i will advice you replace the sensor board. Because calibration requires you to touch the screen and since it is not responding to touch, it will be pointless trying to calibrate.

Thank you for using fixya.
Caseytech

Jun 27, 2011 | Samsung Star GT-S5233 Cell Phone

1 Answer

Touchscreen not responding


If the touch screen of your phone is not responding to touch then it means you have to calibrate the screen to get it working once again.
To calibrate your screen, be sure that the nuvi is properly charged, then you follow the steps below:
  1. Turn off your nuvi,
  2. Press your finger on the upper left corner of the touch screen,
  3. While holding your finger on the touch screen, turn on the nuvi.
  4. Continue to hold your finger on the screen for about 30 seconds until the calibration screen appears(white screen with touch dot),
  5. Then follow the on screen instructions.
That should do the job for you. hope this helps.

Jan 10, 2011 | Garmin nuvi 255W GPS Receiver

1 Answer

My garmin (nuvi 670) touchscreen does not respond to any touch


If the Touch Sceen is not responding properly, calibrate the touch screen.. Turn the Nuvi off then back on Slide Power key to the right (lock) Hold your finger on the secrren for 30 seconds until the calibration screen appears Follow the on-screen instructions

Apr 08, 2010 | Garmin 010-00358-00 GPS Receiver

1 Answer

Lcd problm


there is 2 types of fault for this....one lcd cable damage or touch panel damage if it is you have replace LCD

Feb 27, 2010 | Sony Handycam DCR-HC30 Mini DV Digital...

3 Answers

The touch screen is not working. After resetting


If the buttons on the touch-panel LCD screen do not respond correctly or do not work at all, adjust the LCD screen calibration. Consult the instruction manual if specific information is required to perform this procedure.
NOTE: The touch-panel LCD screen cannot be calibrated if it is rotated.

Aug 08, 2009 | Sony Handycam DCR-TRV19 Mini DV Digital...

1 Answer

Touch Screen not responding to Touch


Connecting wire/ cable between LCD and Main Board is broken/ cracked and needs to be replace. Contact nearest Sony Service Center for proper repair.

Jul 19, 2008 | Video Cameras

1 Answer

Garmin c330


Try to calibrate the touch screen. Push and hold the power button on until you see a white dot on the screen. This is the calibration mode. Touch the dot and another dot will apppear, now touch this dot again, keep doing this until the unit reboot.

If you touch the 1st dot and nothing happens then the digitizer on the LCD is dead. If the unit is still under warranty, get a RMA and return it to Garmin.

Dec 26, 2007 | Garmin StreetPilot C330 GPS Receiver

Not finding what you are looking for?

Open Questions:

See all Sony Handycam DCR-HC30 Mini DV Digital Camcorder Questions

Sony Handycam DCR-HC30 Mini DV Digital Camcorder Logo

1,673 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

102366 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...