Delta monitor series 1800 shower head leaks.How do I repair

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

SOURCE: Leak in hand held hose, Delta In2ition

you must be missing a washer or gasket that goes in the hose end, of the hose try teflon tape,this is all your plumber is going to do.

Posted on Jul 17, 2009

SOURCE: a single handle delta shower control lets water

Make sure the drip is continuous because the shower head will drip for a few minutes until it empties out. Replace the cartridge or washer kit if it keeps dripping.

Posted on Sep 26, 2009

SOURCE: I have a Delta 1400 single handle tub/shower valve

You might have to replace the tub spout, because the divirter is not closing all the way. A new one will stop water from getting by it.

Posted on Sep 30, 2009

SOURCE: My delta shower diverter is leaking. How do I find

You may only need to soak the old one in vinegar overnight to remove hard water crust.

Take the old one out and take it to the plumbing store and get an identical one. There aren't very many part numbers for this part; all I've seen is for color choice, chrome or bronze. See if they have a special wrench for reinstalling it, as the diverter valve hex head is very thin and if you aren't fairly delicate you can mangle the brass casting of the faucet body (been there) or distort it using channel locks, vice grips and the like when removing the old one (done that).

Posted on Dec 10, 2009

SOURCE: How do you remove the temperature knob and cover

http://www.deltafaucet.com/customersupport/documentation/1824-74.html?document=pd&documentIndex=0 The very center piece of the temperature setter pops off with a screw driver. Remove the screw underneath it and everything else to the handle comes off. Firmly grab decorative sleev behind handle and pull. Firmly grab round brass collar and turn counterclockwise. carefull pry cartridge from brass body.

Posted on May 29, 2010