Question about Thermasol Steam Bath Generators - Ambiance Pro - AMBPRO

2 Answers

Thermasol Pro 150 - 25094. Doesn't work. I have a very simple controller. Just a gib gray button and four other led lights near the 15 , 30, 45, and 60 lights to set the time. I think I need to do the auto flush, but I don't know how. Isn't it just a matter of press and hold the button until it starts flashing?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You can contact Thermasol tech support at 800-776-0711 for help but if your tyring to power flush you ned to press the steam to turn on the unit. the press and hold the steam button until all four led's flash and release. Powerflush will begin in two minutes and the complete cycle will last 45 minutes. Please make sure you exit the shower area until the whole cycle has been ran.

Posted on Aug 24, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Yes thats correct or if you have manuel flush at the genrator there is a ball valve. open for minutes then close and run generator for thirty minutes without anyone in the shower.

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light flashing no steam


Please call Thermasol tech support at 800-776-0711 and our techs will gladly help you out.

Jul 06, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

TIML light is on and nothing works


Please contact Thermasol tech support at 800-776-0711 and our techs can help you get your unit running if you call will model and serial number will be very helpful.

May 21, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

The steam shower reads ttmpl


This is a temp sensor low or disconnected contact Thermasol at 800-776-0711 and our tech support team can help you out.

Feb 02, 2010 | Thermasol Steam Bath Generators - Ambiance...

2 Answers

TTMPL code showing on my Signature series control panel. ???


I have a Thermasol steam generator which had the error code TTMPL and it had to be replaced by the manufacturer. From memory, the error code might stand for "tank temperature monitor pressure low" or something similar. As an aside, the replacement generator just started to show the same error message -- so now I'm two for two -- and not entirely happy.

Jan 16, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

The 60 second light is flashing on thermosol one touch control indicating low water sensor is activated. turned off breaker to reset still flashes. steam will not come on.


Did anyone answer your question about the 60 minute light flashing? I have the same problem and have also reset the breaker but have the same problem :-(

Dec 22, 2009 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

Power flush problems Pro 240 -locked out at 1000hrs


This is a communication error please contact Thermasol tech support at 800-776-0711 and we can help you out.

Dec 19, 2009 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

LCD shows TTMPL and steamer doesn't work. The model is SET-NTS-SN of Thermasol Signature series.


Funny, mine starting displaying the same thing around the same time. I contacted Thermasol and apparently the temperature sensor in the generator unit is malfunctioning and needs to be replaced. They're sending one to me, i'll let you know if it works.

Dec 14, 2009 | Thermasol Signature Series Control...

1 Answer

Water flows thu steam outlet consant


Please contact Thermasol tech support and we can help you out at 800-776-0711

Oct 21, 2009 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

Steam generator will not activate- thermasol model ASD300A


how do you know the unit has power?

what control do you have?

does it light up.

Mar 15, 2009 | Thermasol Steamshower Generator AF Series...

Not finding what you are looking for?
Thermasol Steam Bath Generators - Ambiance Pro - AMBPRO  Logo

Related Topics:

901 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thermasol Power Generators Experts

cracklin joe

Level 2 Expert

105 Answers

Todd Zettlemoyer
Todd Zettlemoyer

Level 3 Expert

533 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Thermasol Power Generator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...