Question about Computers & Internet

Open Question

Dynalink RTA 1025W Problem

I had the modem for about 1.5yrs and was working fine till last october when i noticed the connection kept dropping. I thought it was a problem with the ISP and they seemed to had fix the issue a few times - i.e. the net seem to be working better, but still kept dropping. I lost faith on the ISP and just lived with the problem. I didn't even think it was the modem at all since it was still kinda new. I should have known better.
Now the modem is not working, by that i mean the DSL light doesn't go on, only the power and wlan and the port one if i connect it by cable. I called Dynalink helpdesk and they asked me to reset the modem and restarted an so on. At the end only the Power and WLAN lights went on - so no DSL connection. Since it has been more than a year, now it is outside guarantee. Gutted!

Is it worth trying to fix it by myself? Could it be a software issue?

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Blinking light on the DSL modem.

Unfortunately it sounds like the modem may need to be replaced. I had the same issue. Even after doing a complete shutdown, resetting all the cables, restarting the modem and then the computer, it still did not work. After you get the modem replaced, I would suggest you get a spare, possibably from e-bay, so if this happens again, you will not be without DSL Service.

Posted on Dec 29, 2007

  • 3 Answers

SOURCE: Modem won't connect to internet.

maybe you have to wait for your provider for them to isolate the problem, it seems that your modem got hit maybe by high surge. ask them to bring a spare modem for isolation.. there is no way for you to isolate the problem coz you've already done the basic....

Posted on Jun 20, 2009

durham_darre
  • 150 Answers

SOURCE: i set up a yahoo email account but when i press

The above message indicates that the administrator of this server has decided to ban you from using the server. There are many reasons why administrator's ban people from using their servers, including:

  • Your organisation is listed as an "Open Relay" somewhere on the Internet.
Try to contact yahoo......

Posted on Oct 11, 2009

  • 1 Answer

SOURCE: SpeedStream 4100 - working fine until yesterday

The modem advanced settings had VCI=35. It should be VCI=32 for QWest. See http://www.dslmodemsdirect.com/DSL%20Configuration/VPI_VCI%20configuration%20Page.htm for other providers.

Posted on Nov 06, 2009

emailsendema
  • 97 Answers

SOURCE: My modem only shows two

Hi,
change your modem from PPPOE connection to Bridge mode make a dialup connection to connect internet.

Posted on Oct 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to connect my wireless to my lap top thank you


It seems the Dynalink Analog Modem doen't support wi-fi. You'll need both a wireless router/modem and a wireless network card in order to be able to connect using a wireless signal.

Mar 08, 2011 | Dynalink (1456VQE-C) Analog Modem

1 Answer

I have DSL through Qwest and can connect to the internet, but the modem will drop internet connection then come back on then drop again. I will unplug the modem and restart it; it will connect then drop...


check the configuration of the modem if you can. I do not know the exact model of the modem, could you post it? then with the exact model of the modem you could google it for a Manual, Handbook, or simply good configurations. If the configurations are good, then could be the firmware that is not updated, or in the last case ask Qwest to change your modem for one that works.
A piece of advice don't open it or modify it because you could void the warranty, in case of a change.

Hope this help you!!!

Aug 20, 2010 | Actiontec (GT701) Modem

1 Answer

Voltage for Dynalink V1433VQE


For future reference, it is usually 9-12v AC for an external serial modem because it has to be able to generate both positive and negative 12v rails to be able to communicate over RS232 serial.

A serial modem that requires AC but is provided with 12v DC will power on but won't "talk" to the PC.

Apr 30, 2010 | Dynalink (V1456VQH) Modem

1 Answer

My laptop keeps telling me that it has limited connectivity to my telstra wireless modem and will not go on to the internet, please help. its very frustrating!!


this is because your internet link from the router to your ISP is failing to connect.

Thus yo are limited to the router connection.

Mar 07, 2010 | Dynalink (V1456VQH) Modem

1 Answer

Ppp and dsl lights not showing on modem


its better to reset your modem by pressing the reset button on the back side of your modem for 15 seconds. Then try to connect to the internet

Feb 25, 2010 | Zyxel Prestige 841 (91-004-226010) Modem

1 Answer

Got dynalink V1456VQE modem need to install please help how to


internal modem installing:

1.Switch off the power,and remove the power card from the cpu.

2.Get the cpu separately.

3.unsqrew the sqrews and open the system box

4.you can find the white color slot in the mother board.

5.fix the modem with that slot (Modem Board has the single cutting).it must be fitted with the PCI slot.Slight press down.

6.then ON the system,
Start->all programs->control panel->system
->Hardware->Device Manager

now you can see more items on screen,also you can found the modem which you have installed.

Your new modem is ready to use...

7.If your modem came with cd,then insert the disc in cd/dvd drive .Gently Installed the cd...

8.Then Restart the computer.

Your new modem is ready to use...
---------------------------------------------------------------

External Modem Installing:(We do not need to open the system case)

Type 1:(Using Ethernet Cable)

1.Insert the ethernet cable(RJ 45) in the modem,and connect the other end of the cable to cpu.

2.insert a power adaptor in the modem jack.

3.insert the phone line in modem phone jack.(RJ 10)

4.On the system and Modem.

5.Your new modem is ready to use...
----------------------------------------------------------------------------

Type 2:(Using USB cable)

1.Insert the USB cable in CPU,and connect other end of the cable to modem .

2.insert a power adaptor in the modem jack.

3.insert the phone line in modem phone jack.(RJ 10)

4.On the system and Modem.

5.You must install the driver software cd came with your modem

6.Restart the computer

7..Your new modem is ready to use...

Feb 13, 2010 | Dynalink (V1456VQH) Modem

1 Answer

I set up a yahoo email account but when i press send/receive it comes up as 550 error. i have a dynalink 1025w and am hopeless with computers. please help


The above message indicates that the administrator of this server has decided to ban you from using the server. There are many reasons why administrator's ban people from using their servers, including:
  • Your organisation is listed as an "Open Relay" somewhere on the Internet.
Try to contact yahoo......

Oct 11, 2009 | Dynalink (1456VQE-C) Analog Modem

1 Answer

Adsl connection


have the phone company check the line for "ring and tip" make sure they are the same as before, I suspect that the wire is reversed. the telephone don't care how the wire is run.

Nov 06, 2008 | Dynalink (V1456VQH) Modem

1 Answer

Motorola SURFboard SBG900 loss ethernet connection


Please remove the program of your router and re install it again and it will work..
Good luck
Johnson

Jan 03, 2008 | Arris SURFboard SBG900 (49402201900) Modem

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98914 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...