Question about LG Electronics Dehumidifier. 30-Pint Dehumidifier LD301EL
Dehumidifier won't run. Has error code HI
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be the tempurature of the room you have it in. Make sure it is not operating in a room below 65 degrees F or 18 C
Posted on Jun 02, 2008
1- check if the water collecting bucket is properly installed (the light will show is ON but if the bucket is not propely installed -pushed in the proper position ) -make sure the slots on the bottom of the dehumidifier are posisioned correctly.
Posted on Oct 04, 2008
Change the sensor assembly, Part # 6877A30013M from Appliance Factory Parts in Englewood CO, about $30. Easy to change, plugs into control board, remove old temperature probe by pry T-well open with small screwdriver and then crimping back closed when new sensor is installed, about an hour start to finish, hardest part is getting all the covers off. Mine is back to working like new again!!
Posted on Dec 16, 2008
SOURCE: ch 01
Change the sensor assembly and all will be fine, about $30 from Appliance Factory Parts on line store, about an hour to do, all that is needed is Phillips screw driver to take unit apart.
Posted on Dec 17, 2008
SOURCE: Dehumidifier Error?
Same problem with Goldstar model DH404EY7 -- stop code 01 on startup, bucket full light blinks (drains to floor).
Replaced the main controller board to fix it.
For my model dehumidifer the part # is 6871A20888A, and cost $77.44 (not counting shipping) from Appliance Factory Parts. The Appliance Factory Parts web site also provides parts breakdown (exploded parts diagram) diagrams and service manuals in PDF form.
Posted on May 02, 2009
Tips for a great answer:
Good Morning Mark, thank you for your post!
I see that your Frigidaire dehumidifier is displaying an error code of "ES" and you would like to the meaning of that error code. The "ES" error code stands for evaporator thermistor error. This could be a possible problem with your control panel, thermistor, or a wiring harness. I would recommend contacting your manufacturer for further assistance with your dehumidifier. Best of luck! -Matt
Jun 08, 2015 | Frigidaire Dehumidifiers
Apr 28, 2013 | KUL 65 Pint Dehumidifier
Jul 14, 2012 | LG LD651EBL Dehumidifier
Apr 16, 2012 | LG Dehumidifiers
Sep 08, 2011 | LG LHD459EL Dehumidifier
Jul 16, 2011 | Comfort-Aire BHD-501 Dehumidifier
Jul 14, 2011 | LG LHD45EL Dehumidifier
Nov 13, 2010 | LG LHD45EL Dehumidifier
Nov 10, 2008 | LG DH404E Dehumidifier
862 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: