Question about Prima C2012 TV
If you can't find it under prima look under legend
If not read your manual and depending on the remote you have a option for the remote to find the code by itself
Just have to follow the instuction in the remote user's guide in the place that says "Brand not listed"
Posted on Dec 30, 2007
Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.
1)Make sure your TV and Satellite Receiver is ON.
2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
6) Immediately after, TV turns off, press # key.
Posted on Aug 23, 2010
Tips for a great answer:
Sep 06, 2012 | Prima C2012 TV
Aug 19, 2012 | Prima C2012 TV
Jul 04, 2012 | Prima C2012 TV
Jun 13, 2012 | Prima CV2011 TV
Jan 19, 2010 | Prima C2012 TV
Sep 12, 2009 | Prima C2012 TV
Jul 08, 2009 | Prima C2012 TV
Jan 23, 2009 | Prima C2012 TV
Nov 30, 2008 | Prima C2012 TV
Dec 29, 2007 | Standard (CRT) Televisions
1,614 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: