Question about McCulloch Garden
Power mac pm 145-14
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The numbers you supply don't cross to an operators manual but that is typical of Homelite/Ryobi. I'm going to make an educated guess that it does not have a primer system. Other Ryobi saws with primer systems include it in the specification. The 3535A does not. Close scrutiny reveals no primer.
IMO fuel primers on chainsaws are one more source of problems. In the USA ethanol additives attack fuel hoses. Without a primer routing is from the fuel tank directly to the carburetor and much simpler to replace. Primers on chainsaws operate differently than 4 cycle engines too. No fuel is injected into the carburetor or engine, its only purpose is to ensure the carburetor is full of fuel,
Typical Fuel hose routing:
Posted on Nov 15, 2009
This is an example of a typical fuel system with a few suggestions:
Your basic model number is 600465. I only saw 11- prefixes used with 600465s, no promises I did not miss any. There are a few different suffixes with the 600465s. I think the suffix is on your saw immediately after the basic model number somewhere (On older Macs it is usually on the bottom along with the serial number. The dash of the serial is often the correct prefix). I must defer to you to find your exact IPL, here:
I chose "11-600465-09" as an IPL example:
I find these helpful when getting into an area of repair I am unfamiliar with. Also all components are displayed and part numbers listed.
If you find different size hose a small sample of each taken to a local saw outlet should provide something suitable. Please ask how long they feel any replacement should be (usually 12" ample). HTH
If you have additional questions you can reply below and I will assist you further.
Posted on Feb 04, 2010
Leave the hoses a little long an try it. Logic says the uppermost carburetor connection goes to the priver bulb, but you and I both know logic does not always work.
The IPL (exploded parts list) for your saw is the only detail for fuel line routing and it is sketchy at best; components are listed but may be on different illustrations.
McCulloch IPLs (600160) You provide the prefix and suffix.
Posted on Feb 07, 2010
Tips for a great answer:
When the saw is equipped with a primer bulb, an output line from the carburetor connects to the suction side of the primer (once the bulb is collapsed it draws fuel from the tank through the carburetor to refill as it inflates).
The pressure side of the primer returns displaced fuel to the tank as it is depressed.
To get your manual for your McCulloch chain saw, you need to call 1-800-521-8559, ask for parts, than ask for a PDF user manual,you will need the model number of the saw..
It will be e - mailed to you for FREE.
MONDAY - FRIDAY - 6:00 AM - 4:30 PM (MST)
Please take time to rate me
Aug 18, 2011 | McCulloch Garden
Oct 27, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK
Oct 19, 2010 | Garden
Feb 07, 2010 | Garden
Nov 15, 2009 | McCulloch Garden
Oct 07, 2009 | Garden
Aug 23, 2009 | McCulloch Garden
May 20, 2009 | Garden
41 people viewed this question
Usually answered in minutes!