Question about Lexmark Optra T610 Laser Printer

1 Answer

Lexmark Optra T610 prints distorted and broken text and images

When printing a test page, a very distorted, cut-off part of the test page actually prints. It appears to be zoomed in on the word Windows, as well as some smiley faces, question marks, and other symbols in the top left.

I have already updated the drivers to the latest version, downloaded from http://downloads.lexmark.com/perl/downloads/downloads.cgi

I have tried reinstalling the printer with the new drivers. Same result.

The printer is connected via wireless at the IP 192.168.10.11. Other computers on the network can print normally to this computer. I am not sure what to do next.

Posted by on

  • tanmoor2005 Mar 16, 2009

    I have tried deleting the printer and drivers as suggested, but am still having the same problem. Clicking Print Test Page results in a page with only an inch or two of the test page printed, zoomed in on what appears to be the word Windows, but very distorted and with other characters printed in the top left corner.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

Try deleting the printer and drivers completely, then reinstall

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Prints ok but prints additional blank sheet after each complete document


Press menu button and scroll to the right and access the Finishing menu and select NONE for Separator sheets .


Please contact Lexmark Technical Support for further assistance.

Aug 19, 2011 | Lexmark Optra T610 Laser Printer

1 Answer

Optra T610


If your printer only prints black pages it will require the high voltage power supply to be replaced. this will fix your problem

May 01, 2010 | Lexmark Optra T610 Laser Printer

1 Answer

What are the steps to take a test print page on lexmark T610 optra


go to the printer and faxes right click the printer and go to properties and click on the tes page

Apr 29, 2010 | Lexmark Optra T610 Laser Printer

1 Answer

Our Lexmark T610 laser printer


you have the wrong drivers for the printer. You maybe getting weird characters also. When you turn it off it clears the memory buffer (print job). I assume it seft tet OK. Delete and reload drivers

May 11, 2009 | Lexmark Optra T610 Laser Printer

1 Answer

Our lexmark Optra T610 laser printer keeps telling me to "change tray one to plain paper"


verify paper tray is set for correct paper. print the configuration menu and check the paper size for tray 1. If it does not have right size, examine the tray bottom to see if slider is in place

Feb 03, 2009 | Lexmark Optra T610 Laser Printer

1 Answer

Always prints more to left than established margin


Check you Page Setup andmargin set. Sounds like the page isn't set up properly. When you typing a document, go to the FILE then PAGE SETUP. Margins and Paper Layout.
Hope this helps. Bud

Jan 08, 2009 | Lexmark Optra T610 Laser Printer

1 Answer

Optra T610 Print Problem


Your paper size settings for Tray 1 is probably wrong. Make sure it is set to Letter and the type is Plain Paper. If your Paper size is Universal, then either the paper guide in the tray is set wrong or the paper size sensor is broken. If the sensor is broken, you can disable auto paper size sensing so the printer will allow you to specify a paper size. To disable paper size sensing, you need to go into Config Mode. The other way is to send a PJL command to the printer to disable the function.

Nov 07, 2008 | Lexmark Optra T610 Laser Printer

1 Answer

Printing envelopes


you can replace the paper in the main tray with the envelopes. this is the only way unless you have a secondary paper tray or manual paper feed that does not override the main paper feed

Oct 03, 2008 | Lexmark Optra T610 Laser Printer

1 Answer

OPTRA T 610 Lexmark printer.


It sounds like you are describing the pick arm or autocompensator. It also sounds like you have the printer turned on its right side for that to be on the left. The part you are looking for is part # 99A1056 for the Optra T610.

Nov 06, 2007 | Lexmark Optra T610 Laser Printer

Not finding what you are looking for?
Lexmark Optra T610 Laser Printer Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...