Question about Lazy Boy La-Z-Boy Power Lift Recliner Cashmere

1 Answer

Laz Boy 6 wires pull out of Okin hand control part # 75000208-01 and would like a wiring diagram to put them back on circuit board.

Laz Boy said they dont deal with Okin anymore and to get a new hand control you'll have to replace all parts costing $500. All I want to no is where to push the 6 wires back on board.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I had the same problem occur on my la z boy chair. did you ever get an answer to which way to plug the wires back in??Thank you

Posted on Feb 26, 2015

  • Samuel Sanchez Aug 08, 2015

    here is a drawing I made of mine after I took it apart to find a defect in the wire between motor and button assy. m



6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 249 Answers

SOURCE: bosch wfmc3200uc/01

would need machine in workshop sorry can t help on that one

Posted on Nov 25, 2007

  • 1314 Answers

SOURCE: Frigidaire GLTF2940ES0

remove the bottom panel will find a tech sheet there with more specific instructions and the speed control bd is under the tub on the left hand side unplugged the unit before checking and the door lock is part of the com system turn the washer and see if the door lock light comes on try to open the door with the light on if you can that's where the problem is

Posted on Jan 16, 2008

  • 868 Answers

SOURCE: Wiring Diagram

Have you looked under the main control panel for this??The other way is to contact Hotpoint(GE) support,they will have this information.Just have model & Serial number ready.

Posted on Jun 03, 2008

  • 3 Answers

SOURCE: kenmore elite oasis washer

Today (4/3/09) I got a letter from Sears. They will replace the electronic control board (you know, the F-51 business) for FREE, in warranty or not. Serial #s for the Bad Board begin: CS48 - CS52 or CT01-CT49. Call Sears at 800-847-9083. The voices of all of us have finally been heard! There is a class action attorney firm in San Francisco looking into a legal remedy.

Posted on Apr 04, 2009

  • 1 Answer

SOURCE: washing machine circuit diagram requested

you all need help

Posted on May 18, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cagiva canyon 500 2004 needs new left hand side tail fairing

Hi, Christopher for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
cagiva mito fairing
Stuccu Best Deals on Tail Fairing Buy Exclusive Deals 70 OFF Save Big...

Jan 14, 2014 | 2006 Cagiva Canyon 500

1 Answer

I'm looking for the story booklet that goes with the pressman MindTrap An unsavory demise jigsaw puzzle

Well, if you live in a house, here is what you do.

1. Search the attic. Attic\'s are where little kids love putting things when you play Hide and Seek with them. It really depends on how long you\'ve had the puzzle.

2. Now for the basement. The basement, attic, the same thing. Sometimes you use a basement if you don\'t have an attic to put your trash in, or sometimes, you have both if you run out of space in one.

3. Your little kid\'s room. Ok, admit it. About every day, new babies are being born, and people who were once babies are dying. Kids sometimes play with you if you make them mad or if they are just the cute and playful type.

4. Check your room. Admit it. Even as a teenager, you have so much to deal with, you absolutely forget the fact that - well, you still play with puzzles. So what better to do than check your room? After a night out with your friends, or something, or babysitting someone\'s kids, or doing so much homework, or maybe even taking care of your own kids, you forget where you put things. So please, I\'m begging you, check your own room.

5. If you live with your parents, check the trash or the dump. Admit it. Once in a while, your Father (if you are a boy) gets worried that you\'ll never join the baseball team or any other, or maybe (if you are a girl) guys won\'t like you ever and you\'ll never move out of the house because your Mother let\'s you be so sensitive and play puzzles for happiness. Or your Mother (if you a girl) worries that you\'ll get your heart broken when your date finds out you still play with puzzles at your age, or (as a boy), your Mother worries if you still never leave your puzzles, they throw it away! So check the trash before you post any more problems on fixya\'.

Dec 30, 2013 | Pressman Toy MindTrap Mystery Puzzle; An...

2 Answers

F 50 error code on whirlpool cabrio washer

Simple solution-- needs a new control pane. I just had to deal with the F50 code on a 4 year old Cabrio Wtw6200 model. Did diagnostics, it spun freely but took out the tub just to check, check all circuit plugs as suggested, etc,....At the point of deciding whether to junk it ($600 in 4 years) or gamble for a control board costing $155. and non-refundable if it didn't work. Went for the control panel (part #W10189966). took my husband and I about 25 minutes to replace, and it worked! Spins, no error codes, and even fixed the loud noise it used to have! Wish someone would have told us..... please don't waste your time on a repairman or other solutions...

Oct 19, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

How do i get the back off of a 32" vizio tv? i need to get a replacement screen (ladder cracked the screen). I unscrewed all i could find but it wont separate...

The tv LCD screen panel replacement are not possible because these tvs LCD screen panels are in very limited in productions and only can buy it from the tvs industries themselves.They'll sell it to u but the cost the same a new tv.Because these tvs LCD screen panels are the most important parts of the tvs and 90% the cost of the tvs itself.Tvs that have damages to the tvs LCD screen panels.The tvs dosen't worth as a whole tvs anymore.Tvs only can be used a salvages tvs as elecctronic boards as parts for the replacement for other tvs that need parts only now.So the tv shell doesn't matter now,just take somthings sharp and strong like flat screw driver and pride it open.Save the electronic boards for ur next tv buy the same model for as a replacements or sell it as electronic boards parts on

Aug 11, 2011 | Vizio P50HDTV20A 50 in. Plasma HDTV

2 Answers

The TV fell and the flat screen is damaged. TV is not under a waranty anymorre, and i would like to check the price for replacing the screen - model is 26PF5320. thaks!

Sorry,the tv LCD screen panel it is very important and the most exspensive part of the tv and very limited in productions as parts by the tvs industries.U will not able find it for a LCD screen panel for a replacement anywhere except the tv corporations themselves.As the tvs LCD screens panels are in limited in productions and very important to the tvs,they'll sell it to,but they'll charges for a new LCD screen panel to u the same as a new tv.Sorry ur tv dosen't worth as a whole tv anymore.Tv now only can be used as a salvavges tv for it as refurbish used electronics circuit boards for other tvs as parts only now.

Aug 11, 2011 | Philips 26PF5320 26 in. LCD Television

1 Answer


Got pulled over by a sheriff couple of nights ago for this one ..... like me, it seems your "headlight dimmer control switch" has gone bad. You most likely may have highbeams but no low beam, marker, or tail lights unless you step on the brakes. If you go the Pep boys route it'll cost roughly $80. .... at least thats the quote for my 95 Grand Am, which is why I'll be checking out the area junk yard. They sell 'em for $5 ...... hope that helps. Ron J.

If your dash lights are not working check your fuse block, see owners manual, it is most likely that the fuse has blown. If it's blown then you need to replace it. (Usual cost for the fuse is under $2.00) If the fuse blows again then the short must be traced down and repaired. Start by checking the bulb sockets(see owners manual) then look in other locations were the wire might come in contact with , Look for frayed wire insulation and wrap with electrical tape. If the fuse is okay your problem is harder to solve. I'm experiencing the same problem with a '88 Ford Crown Victoria. All components are working properly. There's powe to the fuse but none to the lights. I've been working on a solution for 3 days. Tomorrow I'll run a bypass from the headlights to the parking lamps, through a 15 AMP fuse of course, as a quick fix. If you follow the previous answer and use a 2nd hand switch be advised that you may have to remoce the entire dash to access the switch to remove and replace it. Good luck

Read more:'t_work_but_brake_lights_do_work#ixzz1LQI2yL3G

May 04, 2011 | 2002 Suzuki Vitara

1 Answer

What will i do if my cellphone keypad dont function?

I think your stuck...Get a new phone as most cell companies have great deals and free phones...Good luck
Be careful with the new phone.

Apr 04, 2009 | Nokia 6300 Cell Phone

1 Answer

Need transistor

Finally I have managed to fix my plasma 6842PEM. My problem was the SS (Sustain) Board and not the Power supply. This board is the vertical one to the right connecting to the Screen/Panel. I tested every component on the board and found one of the Transistors on the heat sink was bad, part # 2PG001. This board is made by Panasonic which can be replaced. I got the Transistor which only cost $20.00 including shipping.

To identify wether this is your problem, disconnect the cable comming from the power board and put on the TV, If the green light stays on then this is your problem.

Thanks all for your help.


Oct 27, 2008 | Sylvania 6842-PEM 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Lazy Boy La-Z-Boy Power Lift Recliner Cashmere Logo

Related Topics:

1,399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lazy Boy Furniture Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Lazy Boy Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides