Question about Kenmore 62622 Microwave Oven

Open Question

Replace light bulb in kenmore microwave

Where is light bulb located in kenmore microwave 721.62622

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MicrowaveSvc
  • 9047 Answers

SOURCE: kenmore microwave range hood model 665.61612100 manufactured 2001

The problem is likely on the control panel, which we repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This often can affect the exhaust fan operation, too. The lights and fan can be inopoerable or stuck on.

If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and

disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Posted on Oct 22, 2007

MicrowaveSvc
  • 9047 Answers

SOURCE: Interior Microwave Light does not work

To find helpful exploded view diagrams and get part numbers, you can just enter your full model number 721.63664300 at the Sears parts site.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on May 12, 2009

HansPP
  • 2510 Answers

SOURCE: Where is the light bulb for the Kenmore Microwave

The cover has to come off the microwave to access the bulb. There are several screws around the back and sides. Remove these and the cover should lift off, revealing the bulb. For your own safety, make sure that the microwave has been unplugged from the outlet for several hours before attempting this repair.

Posted on Feb 20, 2011

MicrowaveSvc
  • 9047 Answers

SOURCE: kenmore microwave nights light don't work.

That's a problem on the circuit board which can be repaired simply and inexpensively.

A YouTube video showing how to remove a typical over the range control panel assembly in under 5 minutes, is here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Dec 01, 2012

Testimonial: "Thanks for the info not sure if i want to deal with removing the board right now.Not sure who to ship to if i do."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior Microwave Light does not work


To find helpful exploded view diagrams and get part numbers, you can just enter your full model number 721.63664300 at the Sears parts site.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 11, 2009 | Kenmore 63662 / 63664 / 63669 Microwave...

1 Answer

Kenmore 63682300 Bulb blew now lights won't turn off


See if I get what you are saying.Sounds like the light switch is bad.That would be the first thing I would check.

Mar 14, 2009 | Kenmore 63682 / 63684 / 63689 Microwave...

1 Answer

Remove Kenmore Mod. # 5648598601 from wall.


A lot of those you can replace the bulb without taking it down. There should be screws at the top that lossen up the vent in the front. Remove the vent, might have to open the door and slide it to the left (a little latch) then you should see a filter that just comes out and behind that is the bulb. I would try that before taking it down Forgot to mention that in the other e-mail.

Mar 04, 2009 | Kenmore 80412 Microwave Oven

1 Answer

Kenmore over range microwave oven / no power at all


Unfortunately, there is a good chance that when the bulb shorted out, it damaged the control board. The only way to know for sure is to do some electrical testing with a volt/ohm meter and the wiring diagram located within the appliance. The relays for the fan and the lights are part of the board. The power should always be disconnected when these bulbs are replaced or the board will be damaged. We would have an appliance repair person take a look to see what the deal is with the microwave.


Go here for Kenmore Microwave Parts: http://www.repairclinic.com/Kenmore-Microwave-Parts

www.RepairClinic.com

Feb 05, 2009 | Kenmore 62622 Microwave Oven

1 Answer

Kenmore Microwave 721.66319 500 Light buld gone out - now what?


First of all, since this will involve disassembly, we have *critical* safety & disassembly info at our site in our listing here on FixYa: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams for your Kenmore model here: http://www.searspartsdirect.com

Enter your model number as 721.66319500.

The light bulb is shown in the "LATCH BOARD PARTS" diagram and it's located in the area of the door switches.

Manufacturers used to include access panels in the rear or side so you could easily change the bulb. That exposed the customer to 110V connectors, and that posed a real liability threat, so they stopped using them.

You now must generally remove the outer cover to replace the bulb.

It's best not to touch the bulb with bare skin, as the oils can shorten thee bulb's life. And I recommend a high quality bulb from places like Home Depot, instead of cheap types from the grocery store.

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 30, 2008 | Kenmore 63252 Microwave Oven

3 Answers

Kenmore microwave range hood model 665.61612100 manufactured 2001


The problem is likely on the control panel, which we repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This often can affect the exhaust fan operation, too. The lights and fan can be inopoerable or stuck on.

If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and

disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Oct 13, 2007 | Kenmore 62622 Microwave Oven

Not finding what you are looking for?
Kenmore 62622 Microwave Oven Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...