Question about Sony HXR-NX5E Camcorder

1 Answer

E:61:30 error message

Rec / timecode flashing , error no E:61:30

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 134 Answers

This error is
"Reset position detect error when stepper iris is initialized"

Turn on the power and set to T (telephoto) end by rotating the
ZOOM manual ring. While observing the iris blades in the
lens, turn on the power again and check the iris blades in the
lens work properly. Inspect the iris drive motor of lens drive
block (Pin qh to ql of CN6602 on the VC-582 board), when
the iris does not operate. Inspect the iris reset sensor of lens
drive block (Pin qd to qg of CN6602 on the VC-582 board),
when the iris operate.
if you need more help you can download the factory service manual from the below link:
http://goo.gl/Wt4pr
Good Luck

Posted on May 16, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tascam dr 100 gives a 'writing failed' file error' message and stops recording


Try using a smaller memory card. This only happens to me when using a 4- or 8-gig card. 2-gig and below, No error.

Feb 24, 2012 | Tascam DR-1 MP3 Player

1 Answer

I m not able too send or rec. messages through nokia e62....even i have entered the required message center no. but no use ...even i have done formatting & flashing... but no use


I m not able too send or rec. messages through nokia e62....even i have entered the required message center no. but no use ...even i have done formatting & flashing... but no use

Oct 06, 2011 | Nokia E62 Smartphone

1 Answer

Dvd does not show what was recorded from my sony camcorder error message C13:02 flashing


This is Disc Access Error, Disk Access Error, Check disc error, Check disk, C error unreadable, disc error code 13, disk error code c1302, c:13:O2 DISC ERROR, Disc Error C:13:02 message Sony mini dvd finalize error code C1302 DVD not finalised, Rec Disabled Record Disable after dropping the camera, DVD not finalized, DVD Disc not finalized, DVD Disk not finalized, DVD Disc not finalised, DVD Disk not finalised, Disc won't finalize, Disk won't finalise DVD Disc Error, DVD Disk Error, DVD Disc Format Error, DVD Disk Format Error, Rec. Disable, not correct disk, the disk in drive is not formatted do you want to format it now.

Nov 15, 2009 | Motorcycles

1 Answer

Sony Cybershot DSC-W90. Error message: Flash settings cannot be changed. What can be done about this?


You have set the the rec more into burst mode. You need to turn it back to single mode. The flash can not be used during the burst mode.

Oct 30, 2009 | Cameras

1 Answer

Error message saying "supply rec. paper"


There is a small side tray on the right side of the machine,check if there are paper loaded in.

Jun 30, 2009 | Canon LaserClass 9000L Plain Paper Fax

1 Answer

Error H U 11


U11 is a "dirty video heads" message. Either use a cleaning tape or have the unit professionally cleaned.

Feb 17, 2008 | Panasonic AG-DV1000 Mini DV VCR

1 Answer

Hunter 44360 thermostat


The message means the tstat was in recovery mode, I would suggest just disabling this function to prevent it in the future. Remove the tstat from its base and look on the back there will be a recovery switch just slide it to the other setting to disable the feature

Jan 24, 2008 | Hunter Fan Company 5/1/1 Programmable...

1 Answer

Synchronize the DSR-45 as a 'slave' to an external unit with SMPTE Timecode


if i,m not miss understanding the problem is rec audio ng.if it,s, the posible cause are; 1;head dirty at the line of the tape causing data from head can,t write the tape optimal.for this problem you can clean the head carefull the head can easy broke., 2;if the picture having tracking posible the guide that bring the tape at the left doesn't fully at the track.for this problem at emergency you can try to push the left guide.



Sep 19, 2007 | Sony DSR-45 Mini DV VCR

1 Answer

WQV1-1CR Wrist Camera Watch


use another memory card first.

Sep 07, 2007 | Casio WQV1-1CR Digital Camera

Not finding what you are looking for?
Sony HXR-NX5E Camcorder Logo

1,347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...