Question about Kenmore Dishwashers
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if unavailable on line, contact mfg's parts and you should be able to order it.
also, they likely do not make the unit. the sears may be able to tell you who made it. that company would be able to get you a diagram. just make some phone calls.
Posted on Dec 21, 2007
I have a Kenmore 665 about 3 years old
Over the last couple months the touch pads have stopped working and I am now down to one control the water miser!
Do I need a new control pad and is that easy to install ?
Thank you for any sudgetstions
Posted on Feb 08, 2008
Hi: I just posted a similar problem, but found a solution. After taking the arm, etc. apart (and verifying no blockages), I thought maybe the lack of water pressure was being caused by the fact that there are TWO holes for the top spray arm (higher and lower rack setting) on my model. ie. that water was being forced out of both holes, causing a drop in water pressure, which was causing the top spray arm to stop spinning. I plugged the unused hole with a wine bottle cork (to keep the water from spraying out the unused hole), and voila, it now works.
I wish all appliance fixes were this easy...!
Posted on Apr 21, 2009
that would be model # 66516012403 correct??
you may have inadvertently set the lock on function..
check this out from your manual...
Use the Lock On to prevent unintended use of the dishwasher
between cycles. You can also use the lock feature to prevent
unintended cycle or option changes during a cycle.
When LOCK ON is lit, all buttons are disabled.
NOTE: The dishwasher door can be opened while the controls
are locked. However, the lock must be turned off and the Start/
Resume button pressed to resume the cycle.
To turn on the Lock
Press and hold HEATED DRY for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher is locked, the light
flashes 3 times.
NOTE: If the Heated Dry option is selected, the light will
temporarily turn off until Lock On glows.
To turn off the Lock
Press and hold HEATED DRY for 4 seconds. The light turns off.
hope this helps,
best of luck,
Posted on Oct 25, 2009
Tips for a great answer:
Sep 04, 2014 | Kenmore Dishwashers
Aug 16, 2014 | Kenmore PRO 24 in BuiltIn Dishwasher with...
Mar 08, 2012 | Kenmore Dishwashers
Aug 22, 2011 | Kenmore Dishwashers
Feb 01, 2011 | Kenmore Dishwashers
Jul 23, 2010 | Kenmore PRO 24 in BuiltIn Dishwasher with...
Mar 07, 2009 | Kenmore Dishwashers
Nov 12, 2008 | Hobart AM14-253 Free-standing Dishwasher
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: