Question about Optics
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Does the focuser move in and out when you turn the knob? If it does then go outside during the day timne and practice focusing on a distant object. Use the eyepiece with the biggest number written on it.
This will give you the lowest magnification-- which is easier to focus.
Posted on Aug 04, 2009
Many times a bad cable will cause this. Also low batteries can cause this.
Contact Celestron and order a new cable. Use an external 12 volt power pack.
Posted on Nov 06, 2009
Do you have a fresh set of batteries in the scope? Better to use an outside 12 volt power pack with the Celestron 12 volt "cigarette" lighter cable.
This can be three things:
Bad cable from hand controller to scope.
Or a broken hand controller
Try fresh batteries first.
Posted on Dec 31, 2009
SOURCE: Celestron NexStar 8SE shows No
Reset the hand controller and reload the firmware. You will need a special cable available from Celestron to load the firmware. The software is available for free on the Celestron web site.
Posted on Aug 01, 2011
Tips for a great answer:
Apr 08, 2012 | Celestron Optics
Feb 06, 2012 | Celestron Optics
Aug 01, 2011 | Celestron NexStar 8i (600 x 203mm)...
Mar 27, 2011 | Celestron NexStar 102 SLT 102 mm (4.0)...
Feb 03, 2011 | Celestron NexStar 11 Telescope
Jan 17, 2011 | Celestron NexStar 6 SE (354 x 55.88mm)...
Nov 06, 2010 | Computers & Internet
Nov 01, 2010 | Celestron NexStar 4 SE Telescope
Nov 05, 2009 | Celestron NexStar 5 SE (300 x 44.45mm)...
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: