Question about RC Xrc Gas Rc Car Scooter

1 Answer

Speedo ON Scooter Not working

Hi There, I have an Italjet Dragster 50cc, I am having trouble with my speedometer. From the looks of it, it has sheared off just after where it screws into the front wheel, If you know any way to fix this myself that would be a great help, I can supply photos of the break if that helps in any way. Cheers Chris

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

If you need to fix this for legal reasons dont bother. on a 50cc you dont legally need a speedo as you shud be restricted to 33mph tops.

Posted on Aug 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There no gas go through caburetor on my 49cc atv


check diaphram valves are not hard and not sealing properly. Check for blockage in carby circuits.

Apr 17, 2013 | RC Xrc Gas Rc Car Scooter

1 Answer

New spark plug plus new air and fuel filter. Chainsaw will not start or even fire.


If there is a good spark and fuel getting to the plug there are only two reasons why it will not fire, sheared flywheel key knocking the timing out, or it has partly seized and has low compression.

Aug 09, 2012 | Poulan P3314 14" Gas Chain Saw 2.0 Cuin...

1 Answer

Omega ZL 4000


This is a Chinese manufactured chainsaw. Best bet is to look for one that looks like it and try to find a manual for one destined for an English speaking market.
http://www.asianproducts.com/product/A12990502904599417_P13056105438087194/gasoline-chainsaw.html


http://elaluminio.es/producto/jardin/motosierra-gasolina-omega-zl-4000/

Jul 27, 2012 | Omega Chain Saw 50CC 20" Bar

1 Answer

Hi, My electric gate RAMSET 100 turns but does not pull the chain to close or open the sliding gate. What do you think it's wrong with it? Thanks in advance.


Look for a broken or missing shear pin that connects the drive sprocket to the motor. the pieces should still be in the sprocket and motor shaft if it is a roll pin, which I would expect, and will need to be punched out with an appropriatly sized drift pin punch, It's usually easier to drive out the pieces if the sprocket is removed from the shaft so the holes don't have to be matched up. Replace the pin with one of the same size if available, a soft steel bolt and nut may be used in a pinch but should be replaced with the proper roll pin as soon as possible.

Nov 13, 2010 | RAMSET Ram 100 Slide Gate Operator 1/2HP...

1 Answer

I have a 4052 mcCulloch 4 ton log splitter. What kind of oil does it take for the hydraulics


Not having a mcCULLOCH manual I dont know what they reccomend,but on mine I just use HI grade industrial/commercial hydraulic fluid. I have been using this for 15 years and have had no trouble. I change oil and filter every year. Thank you.

Nov 06, 2010 | McCulloch 4 Ton Electric Log Splitter #...

2 Answers

I want to register my new shears


Go to this site and about the 4th item down in the left column is "product registration' .. you can follow the prompts from there ..

Please Vote !!

May 13, 2010 | Black & Decker 7.2 Volt Interchangeable...

1 Answer

I NEED TO REPLACE THE BATTERY IN MY SSC 1000 . Cant get any information on how and how much it will cost


well to be honest its realy not worth buying a new battery pack for the black and decker, there very pricy it may be cheaper just to buy a new unit,,,

Mar 27, 2010 | Black & Decker 7.2 Volt Interchangeable...

1 Answer

Shearing keyways


You are not getting the flywheel nut/clutch starter tight enough.

Jul 09, 2009 | Briggs & Stratton Briggs Stratton Vanguard...

1 Answer

I lost the keys to my 49cc scooter; i need a wiring diagram


if you want to hotwire you ped all you need to do is take the front of find the wires connecting to your ignition and there shud be sum form of plug, pull it apart ( this will do no damage t oyour ped) then you shud be able to normally kik start your ped, the only down side is, the only way i have found to stop the engine is to reconnect the plug.

jope this helps, i did it and im only 16!!

Jun 04, 2009 | RC Xrc Gas Rc Car Scooter

1 Answer

Electric scooter problem


Regulations governing electric scooters vary by particular country, state, and even municipality. Small electric scooters are explicitly allowed by law in California and several other US states. Some states have no regulations at all relating to small electric scooters. However, other states do not allow electric scooters on public streets. Please check your local laws for specific information.

Aug 27, 2008 | GE Sunfire General Electric Wheelchair

Not finding what you are looking for?
RC Xrc Gas Rc Car Scooter Logo

Related Topics:

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top RC Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1378 Answers

Brad Brown

Level 3 Expert

13765 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2717 Answers

Are you a RC Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...