Question about Computers & Internet

1 Answer

Upgraded motherboard & cpu, cant load windows

Screen asks to repair or load normally, but no matter what is chosen goes back to that screen after attempt

Posted by on

  • 1 more comment 
  • Anonymous Mar 12, 2009

    I DONT HAVE MOTHERBOARD CD ND I HAVE TO DO PARTION OF LOCAL C DISK TELL ME WAT TO DO

  • marjohnson55 Mar 12, 2009

    i can get to command prompt but how do i get the drivers to downlaod from either the cd or web?

  • Thomas F. Schneider May 11, 2010

    Download some free harddrive software and check the  harddrive. You need not have windows installed to use it. Seatools from below website , for example.
    Seagate.com

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

Download the Hard test driver software from another computer and burn it to a disk.  Run the disk  from the CD. It has it own software and doesn't not need windows. Set you BIOS to run from CD first  If you hard drive is not ok nothing will will load onto it and  correctly until  it is replaced. If it is ok, then you can reformat it  and go from their. 

Posted on Mar 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I got this computer off side of road and can't get windows to load it's try's then the screen goes black . here is what happens . I turn it on the screen comes up black it asks what I would like to do ?...


The first screen (start windows normally etc) appears because the computer ahs not shut down normally before. Since you choose to start windows (normally or last known...) and the Windows logo comes up with the loading bar, this means that the computer is starting to boot. Some hardware or software (windows) problem appears and the boot never ends. Possible reasons: motherboard failure or hard disk failure. A good idea is to re-install windows to check the results. Mention that in case of reinstalling the windows, during the procedure choose to reformat the hard disk so it will be checked for errors and reported.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Sep 02, 2010 | Intel Motherboard

1 Answer

No POST/Black Screen


Believe it or not, clearing the CMOS might actually help. Make sure you do it right by completely unplug the power cord or turn off the PSU, then take the battery out.

It also sounds like the CPU might be too hot. Look under the fan of the heatsink and see if there is any dust that will block the airflow. When the computer is on, touch the heatsink and feel if it is really warm. If it is really warm, it's a good sign, you might just need more airflow. If it is cold, you might need to reinstall the heatsink/apply new thermal compounds.

Mar 07, 2010 | Gigabyte Computers & Internet

1 Answer

Computer continiously ask for reboot


DFirst thing to do is to UNdo everything you have just done: Memory Upgrade and CPU Cooler. If normal operation returns, try the upgrades, one at a time, to narrow down the source of the problem. I suspect the memory, as a DIMM chip not correctly set up will cause this problem. Let me know what it does, please? jaye.ellen@gmail.com

Dec 12, 2009 | ASUS P4SP-MX Motherboard

1 Answer

Blank screen


NEED MORE INFO

WHAT WAS ORIGANAL PROBLEM OR JUST UPGRADING SOMETHING FASTER

CANDYMANGANDY

Jan 28, 2009 | Computers & Internet

1 Answer

Wish to increase cpu spped and memory


Hi thefuncouple, here is the ASRock link for supported CPU's:
http://www.asrock.com/mb/cpu.asp?Model=K7VM2&s=462
The Athlon XP 2600+ CPU is the highest CPU this board can support. (It will be hard to find one).
Main web site for the K7VM2: http://www.asrock.com/mb/download.asp?Model=K7VM2

Honestly, ASRock does not have drivers for Vista. Some of the drivers listed for XP may work with Vista. Your best chance is to download & run Windows Vista Upgrade Advisor 1.0
(Before installing Vista in to your system).
http://www.microsoft.com/downloads/details.aspx?FamilyID=42b5ac83-c24f-4863-a389-3ffc194924f8&DisplayLang=en
Vista, any version needs at least 1GB of memory. Two GB is recommended. After running Upgrade Advisor you will know if your ASRock motherboard can handle Vista. You should be able to upgrade to Vista (Over-writing XP) but only if your system passes the Upgrade Advisor.
Your best bet would be to buy a new system with Vista on it. Your ASRock board is just too old for Vista. You'll save money upgrading to a more supportive PC.

Good luck thefuncouple!
Vista is not for everyone, many users end up going back to XP.
Thank you for using fixya.
Mike

Dec 11, 2008 | Asrock K7VM2 Motherboard

3 Answers

CPU upgrade problem


Hi there

what are your pc specs , like ram ect. So we can find out what is wrong. please check your cpu settings and reset the pc bios to see if that hasnt solved the problem

thanks

roger

Nov 12, 2008 | AOpen AK77-8XN Motherboard

2 Answers

Problem with mobo upgrade ... From Intel CPU to AMD CPU


hi dale, itsnot a good thing when you see the blue screen of death, cause recent changes hardware normaly maybeif you have changed from intel to amd using mobo and all parts are amd now , maybe if you reinstalled your operating system the new hardware that is installed will accept you software cheers steve good luck

Apr 26, 2007 | Jetway 939GT4-SLI-G Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98762 Answers

David Payne
David Payne

Level 3 Expert

14037 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...