Question about Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White

1 Answer

I have the F1 appeares at the front and ringing all the time

I have a frigidare gallery four and I have the four that doesn't work. On the front panel is F1 written and rings all the time. I tried click the clean botton, cancell botton too(this one has worked last time that have the similar problem). I unplug from the power for 4-5 hours, but no results. Last time(2 years ago) I had this problem bat il was fix just by doing this tricks. In plus I changed both fuse and I open the back of the oven to see if something was burned. I didn't found something.
Please give me a solution.
Thanks Vincent

Posted by on

  • vincenck Mar 17, 2009


    Hi jumptrout51. Where can I buy an electronic oven control (clock) and how much it costs. Thank you

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 3,361 Answers

Sorry. Your electronic oven control (clock) is bad and must be replaced.
Before you do that you might try opening the control panel.
Unplug the range from power.
Unplug the connections to the control wait 30 seconds and re-attach.
If that does not work.
EOC time.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire oven


Sounds like your control board/panel has shorted out. You would definitely need a professional to diagnose correctly and properly repair.

Dec 26, 2012 | Frigidaire 30 in. Electric Gallery Pro...

Tip

Please help. We are a cleaning crew that went to a client's home to do a reno...


If you are having oven problems with your GE XL44 oven then you need to do a bit of oven troubleshooting. The first part of that problem is to know what the oven fault codes are trying to tell you.

The codes F0, F1, and F7 could either be a problem with the control or the keypad.
-to see what the problem is cause by, push clear/off on the keypad. Then disconnect the ribbon connector from the control. Wait at least 35 seconds to see if the code comes back. If the code comes back then the control is the problem. If the code does not come back, then replace the key panel.


F2 – This means there has been a problem with the temperature of your oven. It could be a cooling fan or air flow problem. Also could be that the oven got too hot in either a baking mode or a cleaning mode.
-check to make sure the contactor contacts are not welded together. If this happens the oven will always be putting out heat, even if turn off. The thermal switch may also have burnt out. If this switch is open then the fan may be bad, causing the thermal switch to activate. The thermistor that senses oven temperature may also bed bad or have a poor connection somewhere.


F3 and F4 - These are oven temperature sensor codes.
- check the sensor by removing power to the range and then removing the sensor. Check that the sensor reads approximately 1100 Ohms at 72 degrees F. Then check the oven sensor lead to make sure that it is not shorted out. Then check the terminals to make sure that you are getting good contact. If everything checks out okay, then replace the control.

F5 – This is a relay safety circuit failure code
-check the lock circuit for problems. Then check the thermistor for high resistance. Press clear/off on the key pad and reprogram the control. If the code is still there then replace the control.
The F5 code can also result from a short loss of power. If you had a power flicker then reset the control.

FC – This shows a problem with the door lock circuit. Check all the wires and the switches. Check the operation of all the switches.

FD – This is a problem with the meat probe. Check the probe wiring and the receptacle where the probe plugs in at. Resistance on the probe should be 30 to 50K ohms at 72 degrees F.

FF – This is a problem with the door motor safety circuit. To fix this the control will need to be replaced.


http://www.fixya.com/support/r4388324-oven_fault_codes_ge_xl44_oven

http://www.fixya.com/support/r4391163-range_stove_oven_door_glass_replacement

http://www.fixya.com/support/r4404788-electric_oven_problem_oven_will_not_shut

http://www.fixya.com/support/r4319588-electric_oven_problems_not_use_in

http://www.fixya.com/support/r4154940-fault_codes_admiral_range_stove_oven

http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

http://www.fixya.com/support/r3907570-buy_appliance_parts_online

on Jul 01, 2010 | Ovens

1 Answer

How do you clean a self cleaning oven? I don't have the instructions. It's a Frigidare gallery convection oven. We bought it used. I just need the Instructions. (it didn't come with any) Thanks Debbie


Hi,


Before you go working too hard to get you oven to go into the self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!

Feb 19, 2011 | Ovens

1 Answer

We purchased our Frigidare Double Oven, Model Number FPET3085KFA, October 2009 (15 months ago). We ran the self-clean process for the first time yesterday on the top oven using the 4 hr option and it...


try turning your breaker off for 20 minutes, then try it again,, if this does not help it could have burnt out a element or the main board has went out,,, also make for sere you are getting the full 220 volts to the unit,, this will involve taking the unit out

Jan 19, 2011 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

What does F1 mean


F0 & F1 EOC failure Replace EOC

MORE HERE

Dec 20, 2010 | Frigidare Ovens

1 Answer

Help our frigidare double oven is locked and we cannot get the chicken out....it keeps beeping and showing an f1 symbol


Press Clear/Off to stop the beeping... then press clear/off again. If it doesn't unlock - wait about 15 minutes for it to cool down.

The F1 error means the EOC (Electronic Oven Control) board has a failure - and thought there was a run-away temperature condition.

It should allow itself to unlock after a few minutes of cool-down.

For additional help in finding a replacement part - a Model # will be required.

Thanks for using FixYa!!

Jun 26, 2009 | Frigidaire Ovens

1 Answer

Frigidaire Gallery ES340 electric range, burners will not turn on


Okay,
1, check your power, locate your breaker for the range. turn the breaker off and turn it back on.
Your Range it is electronic control on the Oven but not the Stove Top heating elements.
After you reset the breaker and it still not work.
Please let me know more about the unit.
When you purchase.
How/when it happen.
What is the indicator showing.

nguyen@ite.net

Jun 09, 2009 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

Dishwasher not cleaning the dishes


have you cleaned the fliter in the bottom

Feb 15, 2009 | Frigidare FGB24S5DC Gas Single Oven

Not finding what you are looking for?
Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White Logo

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...