Question about Panasonic KX-T7630 Corded Phone

2 Answers

Change name that comes up on display phoned

I have a Panasonic XDP phone - need to change a display name as new person is not sitting at desk with that phone - so when they buzz me the new person's name comes up on my display. THANKS!~

Posted by on

  • realtorca97 Apr 29, 2009

    i have tried everything suggested to change messageand it will not change. I have tried the unavailable msg, busy msg, name chane msg. I pressed pound key after and it says it is saved but it still gives the same msg that I first recorded.

    Please help This is crucial for business.

    Thank you

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 2,460 Answers

Name programming requires access to system programming. If you go to the main phone and, without picking up the handset, press PROG and dial **1234 and ENTER, it will go into programming mode. Dial 004 and you are looking at the Ext Name screen. An ENTER at this point starts at 101 OPERATOR (default). Now just start pressing the letter keys and the right arrow to spell out the names. The keys press 7 times for ABCabc2. Punctuation and special characters are under the 1 and 0 keys and STORE or ENTER saves your work.

When I install my systems, I let everybody have access to the programming by class of service. You may be able to program from any phone in your system, it depends on the installer. The phone that rings when you dial "0" is probably the main phone if you can't program this from your own phone.

PROG exits programming.

Carl

Posted on Mar 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On my magicjack hase no number and is reg

Posted on Mar 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Phone Display


Panasonic KX T7633 user manual pdf

the link above is the manual

The Panasonic KX-T7633 is a telephone that will satisfy your demand for a user friendly operation. You can enjoy the hands free conversations offered by the speakerphone facility that the Panasonic KX-T7633 features. The 2.5 mm headset jack that you will find in this Panasonic KX-T7633 phone will enable you a hands free usage for paperwork or PC. It has a 3 line LCd that gives you a readable and clear display. It is available in charcoal and white color. This phone gives you an opportunity to choose the right color that will go along with the d?cor in your home or office. This device looks professionally because of the executive design. The Panasonic KX-T7633 has 24 programmable keys with dual color LED. It also has a 3 line caller ID LCD with back light. You will love the headset jack. It supports caller ID. The Panasonic KX-T7633 has a speakerphone, Intercom, automatic redial and an LCD display. There is a chance for 8 way conference call. It also features a digital XDP (eXtra Device Port) jack. I warmly recommend this phone for your home or office. You will be extremely satisfied. Panasonic phone models are very durable and you can use it for years to come. It will serve well to your every wish. Before using the Panasonic KX-T7633, it is recommended to read the Panasonic KX-T7633 user manual. If you have lost yourmanual, you can always download one here, free of charge: DOWNLOAD PANASONIC KX-T7633 USER MANUAL PDF

Jan 07, 2014 | Panasonic KX-T7633 Corded Phone

1 Answer

Is the Panasonic 7731 compatable with the D816 Hybred system


Yes. It requires both pairs to be connected back to the KSU and you lose the XDP that isn't on the back of an analog phone. Also, you can't plug it into an XDP of an existing digital phone.

Carl
.

Oct 17, 2011 | Panasonic KX-T7731 Corded Phone

1 Answer

I bought five Panasonic KX-T7730X phones. The business i work for has a Panasonic KX-TD1232 system. I unpack all phones and tried it on different extensions and won't work. there isn't ant pulse....


A TD system is a DIGITAL phone system and the 7730 phones are ANALOG. I don't know what X means, but I guess they're not from the US :-). Anyway, the ANALOG phones need 4 wires to work, instead of the 2 that the digital phones have. If your installer was lazy and didn't cross-connect 4 wires at the frame or put in 4 bridge clips on each jumper, then you don't have a voice path. Or, XDP is turned on and you'll have a bit of a problem.

If you have an IM and a PM for the TD system, you can find the wiring diagram and the instructions to read the XDP status. Quick answer is the first 2 of every 3 pairs will run to your phone. If you start with a digital phone in the port first, turn on XDP and plug a single line set into the XDP port, you will get dial tone (may have to dial 390 or 391 to enable/disable the XDP twinning) and that dial done will be different from the digital phone. If you don't get dial tone, your first pair wiring is missing. Fix that, turn off XDP and you 77xx series phone will now work in the port.

Carl

Jun 23, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

D816 phone system with new KX-td7895 cordless phone that we cannot get the phone system to recognize. I have been reading posts that say to disable the XDP feature (program 600) but I cannot find a menu or...


That model is either a system phone or a single line set. If you're going to use it as an SLT, then you can plug it into the XDP and enable the port in 600. 600 is a SYSTEM program accessed from the main phone and enabled per port.

If you operate in the multi-line mode, you need to wire this phone to its own port on your 816 system.

Carl

Oct 15, 2010 | Panasonic KX T7220 Corded Phone

1 Answer

How do you change the main display name on a Panasonic KX-T7453?


hello,
enter the menu of your phone, go to profile choose the profile you want and personalize it.
when personalizing change the name of the profile to the you want and activate the profile.
i am sure it will display your name.
thanks for using our website.

Jun 04, 2010 | Lands Phones

3 Answers

How do i Names to Extention numbers on the Panasonic KX-T7636


If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system. From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook press Program * * or Program * # followed by the system password ( default is 1234). Now press 004 and then ENTER. Enter the extension number you want to change. Now enter the name (the same way as texting on a cellphone) To save the changes press AUTO DIAL / STORE. To go to the next extension press NEXT on the screen. When you are done lift the handset and put it down to exit program mode.
PLEASE rate/vote this answer if it was helpfull.
THANK YOU

Nov 09, 2009 | Panasonic KX-T7636W Corded Phone

1 Answer

Panasonic KX-T7668 Change name displayed on extension??


This facility of changing name is in admin program. when you call up some body their name will bw displayed on your screen. It's fine .tell us that what name other person get.

Jul 14, 2009 | Panasonic Lands Phones

1 Answer

I'd like a (relatively) simple answering machine for d1232.


I can get you there, but you have to do some programming.

A Panasonic TD-1232 starts its life with 16 analog and 16 digital ports. On the back of your digital phone is a modular jack called an XDP If you plug in a single line device and dial 390 from the digital set, and it's programmed, you will split the extensions to whatever your number is and 100 more than your number (by default). So, if you're 110, the XDP analog port is 210.

Once you get that far, it's a (fairly) simple matter to go into programming and make 10-2 (the second port for your hardware) ring on any and all lines you choose.

I hope this is a good start, as full programming is beyond the scope of a free forum.

Carl


.

Apr 08, 2009 | Panasonic Lands Phones

1 Answer

D1232 extension programming issue


Welcome to Panasonic TD programming....

Even though the hardware doesn't exist, the numbers do. The universe of 101-164 and 201-264 are already taken. Oops, 200 might be available, 100 might be available. 167 and 168 and the 80's might work.

It's a 3 step process. Change 210 to 200 change 225 to 210 and change 200 to 225. There's your "swap".

Now, keep in mind that the XDP port for 110 is 210 and if your voice mail is analog.....Ah, but that's another thread.

Carl

Sep 19, 2008 | Panasonic KX-T7453 Corded Phone

2 Answers

Change home screen display


Press the * key to switch back to date and time. Also, the SHIFT button on top will change the STA EXT FEAT.

The only way I know of changing the name is in the main phone system.

Apr 23, 2008 | Panasonic KX-T7453 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7630 Corded Phone Logo

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

guyvstewart

Level 2 Expert

82 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...