Question about GE Profile WPRE6100G Top Load Washer

Open Question

GE Profile washer stuck on sensing mode - GE Profile WPRE6100G Top Load Washer

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 30 Answers

SOURCE: Agitator problem

Check to see if any thing is under the agitator. If not then maybe the bearings going out or other part of machine . Besure the cap is tighten so agatator don't come off. Check for ware on agatator top to the tighting nut.

Posted on Jun 02, 2009

hiltonjug
  • 612 Answers

SOURCE: GE Profile WPGT9150 will not start cycle

You have a bad transmition.
Please rate this solution

Posted on Aug 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Coin stuck in agitator. how is agitator removed


Normally you can take the top of the agitator off with the use of a screw driver or by turning couter clockwise. Once the top is off you should see a nut or bolt. Removing this will allow the agitator to be removed.

Nov 12, 2010 | GE Profile WPRE6100G Top Load Washer

1 Answer

How do you remove the agitator from ge profile washer wpsr3100w0ww


If you take your washing pot out of the centre consol then underneath that a little way down is a plug with little handles on it. Pull at this and it will come free then underneath that is a bolt i think it's a 10mil unscrew this and the agitator will come out.

Hope this makes sense and helps

Mar 20, 2010 | GE Profile WPSR3120WWW

1 Answer

GE Profile WPGT9150 will not start cycle


You have a bad transmition.
Please rate this solution

Aug 20, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

Washer only spins


Have you tried to unplug the machine, sometimes the control boards can get stuck and if you unplug it for say 30 seconds then plug it back in, it may reset itself. otherwise you may have to call someone these are very complicated machines.

Jun 19, 2009 | GE Profile Prodigy WPSE4200A

1 Answer

Agitator problem


Check to see if any thing is under the agitator. If not then maybe the bearings going out or other part of machine . Besure the cap is tighten so agatator don't come off. Check for ware on agatator top to the tighting nut.

Jun 02, 2009 | GE WPGT9360E Profile Harmony 4.0 cu. ft....

4 Answers

Ge profile front load washing machine demo mode


I called General Electric and this is the solution:


unplug the machine for 2 to 3 minutes.

Plug it back in the wall

Do not put the power back on.

Open the door

Press the start/pause button 5-6 times

The display will say demo exiting...

This works. Also don't forget to remove the shipping bolts before starting your washing machine!!

Good washing!!

Jan 04, 2009 | Zanussi IZ141W Front Load Washer

3 Answers

A problem has been detected with this unit i need know how to enter my Service Mode Diagnostics


I'll email you a few pages out of a service manual for a WPGT9360 (closest I could find to your model number) hope this helps.

Nov 12, 2008 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

2 Answers

Ge Profile Harmony Washer doesn't drain properly.


It sound like you have a blocked pump. Remove the pump from the machine and check where do you have this clogged, inside the pump or in one of the pipes connected to it. Good luck!

Aug 16, 2007 | GE WPGT9360EPL Top Load Washer

Not finding what you are looking for?
GE Profile WPRE6100G Top Load Washer Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...