Question about NetGear WGR614 Router

1 Answer

PS3 online game (NFS Undercover) not working on new router.

Comcast changed out a bad router to a netgear router. My PS3 can access the internet and surf, but now I cannot connect to the NFS undercover online game to race. It was working before on the old router (when the old router was working )but now its not. I have the same settings and all the computers in the house work. The old router was a 'gateway router' according to Comcast. The only difference in the two routers (old vs new) is the old router connected to the cable via a coax connection, and the new router connects to the cable modem via a cat 5 cable.
Thanks for the help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

I might advised you to call the PS3 manufacturer to gather the ports of the PS3 then you'll needing the help of netgear provider to open the ports of the PS3 to the router, so that the PS3 will allow to the firewall of your router.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not access to my NETGEAR52 router anymore


Its the wire plug or the wire itself

if wireless router. And your land phone working fine. Call the internet provider company to fix this for you

May 07, 2015 | NetGear Routers

Tip

Port Forwarding for PLAY STATION on NETGEAR routers


The following steps will help you forward ports on the NETGEAR router for Play station network (PS2, PS3, PSP). At time you can not access or play online games through your PS and in such cases you need to make sure that you have the required ports forwarded on your router as mentioned below. The below steps are applicable for NETGEAR router model WGR614, WGT624, WPN824, WNR2000, WNDR3300, WNR854T, WNR834B etc

1. Open a browser (Internet Explorer, Mozilla Firefox or Safari) on your computer connected to the router.
2. Access the router, usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
3. Login to the router (Username = admin and Password = Password unless you have changed it).
4. Click on Port Forwarding under Advanced.
5. Click on 'Add Custom Service' button.
6. Specify any name for the service (PSN1). Select Service Type as TCP/UDP
7. Specify the Start and the End Port as 80.
8. In the server IP Address specify the ip address of the PS3.
9. Click on 'Add' button.
10. Follow the same steps to open the below ports
Start = 443 End = 443 use name as PSN2
Start = 5223 End = 5223 use name as PSN3
Start = 3478 End = 3479 use name as PSN4.
Start = 3658 End = 3658 use name as PSN5.
Start = 10070 End = 10080 use name as PSN6.
Click Apply.

These steps would allow you to access online games on your PS connected through the NETGEAR router.

on Mar 18, 2010 | NetGear WGR614 Router

1 Answer

Internet status light on netgear wireless n300 blinking. internet service on and off. 2 macs in house.


You can do a reset on the router to make a factory settings.On the back of the router you can look for a small hole usually with the word reset.Press it for 20 secs with the router on but disconnected from the Ethernet cable.Start up your PC and surf to the router Web UI (192.168.***) and make your settings.

May 26, 2012 | NetGear WNR2000 Wireless Router

1 Answer

I have comcast for internet, will the NETGEAR RangeMax Wireless-N Gigabit Router with USB WNR3500L work for comcast?


Of course it will. I have comcast cable internet but don't forget, you will need a cable modem to access cable internet and then you can use any router for networking including WNR3500L.

Aug 04, 2010 | NetGear WNR3500L Router

1 Answer

I have a netgear wgr614 router and can't get my ps3 to play online.(upnp is not available)


Most routers have a menu you can access.
There you must forward your ports.
You must find out what ports ps3 uses and put them into your gaming ports.
Depending on your router settings you may need to do specific assignments.
This should get you going.
Xbox requires me to have the proper internet settings to access my router.
Portforward.com helps noobs to forward ports on your router by use of your computer. Once they are open, your UPnp will be set.
It may seem hard, but once you give it a shot, you will be happy.


Mar 16, 2010 | NetGear WGR614 Router

2 Answers

I have a NETGEAR wire/wireless router MBR624GU. My internet provider is Comcast using a high speed internet modem by Ambit model U10C018. I connected the Comcast modem to Router LAN port using a Ethernet...


If you connect the computer directly to the modem, does it work?
If that works then the modem is working.
Now connect the computer to the router and the modem to the router.
You will need to open the set up page of the router to check the settings of the router.
You can set up the router without the CD also.
It is very easy.
Click Here for step by step instructions about how to set up the router

Dec 10, 2009 | NetGear MBR624GU Wireless Router

1 Answer

I have a t mobile usb internet stick which i use to get my internet trhough my pc,and i have an ethernet cable that goes from the pc to my ps3 .everything works fine the internet connection on the ps3 is...


Only router can give you proper NAT settings that can allow you to play online. Since you have a USB internet stick, try to buy a USB to Ethernet converter first. Then you can now use a router

Jun 10, 2009 | NetGear WGR614 Wireless Router

1 Answer

Im tryin 2 hook up my ps3 to this netgear router isnt connecting


Playing Online Games Behind The Router

A router uses a combination of hardware and software to prevent unauthorized users or internet traffic from accessing your private local area network (LAN). If your game console, such as Playstation is behind the router, you will need to configure routers Port Forwarding feature in order to play online games.

Note: You will need to get the ports and service type for your games. This is usually available from the games website.

Steps how to configure router to play online games:
  1. Open a browser and type in the following URL: http://www.routerlogin.com or http://192.168.1.1 (depending on the model number of the router)
  2. Type the Username as admin and the Password as password and click OK.
  3. Click on Port Forwarding under Advanced menu.
  4. Then click on Add Custom Service
5. Under Service Name, type the name of the game.
  • Select the Service Type from the drop down menu (depending on the game).
  • Type the Starting Port and Ending Port numbers (depending on the game).
  • Type the IP address of your PlayStation in the Server IP Address box and click Apply.
  • Click on WAN Setup under ADVANCED menu.
    • Check the Disable SPI firewall box
    • Change MTU size from 1500 (which is the default) to 1300 and click Apply.
    Now the Playstation is ready to use.

    I hope this helps...

    Apr 10, 2009 | NetGear WGR614 Wireless Router

    1 Answer

    Sierra Wireless AirCard 595U And PS3


    I understand that you want to connect the PS3 using the Wireless card and NETGEAR card. Please note that the setup you have will not work for internet access. You can not configure the Air card to work with NETGEAR router. you need to have wih a broadband connection available for this router to connect to internet.

    Once you have the router configured with Internet access then you may either connect the PS3 wired or wireless to the router, like you connect a desktop or laptop to the router.

    Jan 12, 2009 | NetGear WGR614 Wireless Router

    3 Answers

    Netgear wgt624 just stopped connecting to internet


    I encountered the same problem, with the same modem and also Comcast, and here's what wound up working for me, after time spent with a nice guy on the Netgear customer support line:

    1. Log into router: http://192.168.0.1 (or 192.168.1.1) - user: admin / password: password

    2. Under Maintenance, click Router Status. If IP Address is listed as 0.0.0.0, there's your problem-- router isn't getting address from modem.

    3. At bottom of Basic Settings, under Router MAC Address, change selection from Use Default Address to Use Computer MAC Address.

    4. Click Apply.

    5. Click Router Status again-- non-blank IP address should now be listed.

    6. Basic Settings will now show MAC address under Use This MAC Address. See if you can get online now. I could, and I hope you can, too!




    Dec 04, 2008 | NetGear WGT624 Wireless Router

    Not finding what you are looking for?
    NetGear WGR614 Router Logo

    221 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top NetGear Routers Experts

    Barry37

    Level 1 Expert

    31 Answers

    MrNutsy

    Level 1 Expert

    36 Answers

    Phillip Whisenant
    Phillip Whisenant

    Level 2 Expert

    120 Answers

    Are you a NetGear Router Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...