Question about Computers & Internet

1 Answer

How do I find the manufacture date on my Maxtor D540X-4K?

Here's everything I could see on the drive itself.

80Gb AT Maxtor D540X-$k
GTLA: LE08Y011-01-B
P/N MX4K080K4
P/N: SG-012343-12547-24S-408G REV: A00
CT: 246B7C02QN8LU6 P/N: 237402-001
P/N: 11S06P5332ZJ1HNRG5G1WH FRU: 06P5237
LE08AT LE08Y4A1 REV 01-A A0815

Posted by on

  • barker93 Mar 11, 2009

    This disk is actually installed in a Echostar Dish Network Satellite Receiver DVR

    (Echostar model# DE02, DishNET model# DISHPVR508).

    The DVR is a 2nd replacement (3rd box) but still pulls the same problems. I suspect the drive is near the end of its life but can't find a date code to verify this. I was able to find date codes on the 1st 2, both manufactured in 2003, June & December, respectively.

  • JDTec
    JDTec May 11, 2010

    This drive is an OEM drive that apparently came with your computer. IBM? It is the reason that it does not have a date on it. To get it replaced in warranty, you have to contact the MFG. of your PC. Maxtor will not hornor the warranty fron the end user.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,229 Answers

In general, hard drives are guaranteed by the manufacturer for one year. 3 years on premium drives. I don't consider older Maxtor drives premium! (probably personal bias).
I would think any 80GB IDE drive would work

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1720 s.m.a.r.t HDD detects imminent failure the computer cant boot-up.


if you haven't got a good back up, external to the hard drive, it may be too late
dead hard drives are mostly un recoverable
take it to a computer repair shop to make sure that it is not a boot problem
if the hard drive is failing, replace it with a solid state hard drive that has no spinning discs to fail

Jan 13, 2017 | Computers & Internet

1 Answer

How do you clean to factory settings a fujitsu laptop


You must do a full system recovery. Go to the manufacturers website to see how to do that on your model and operating system.

Jan 12, 2017 | Fujitsu Computers & Internet

1 Answer

How do I register the 48 television I bought from sainsbury team valley Gateshead for extra six free insurance


you have to go to the Manufacturer's website to register it .nothing FIXYA can do to help

Jan 11, 2017 | Computers & Internet

1 Answer

How to get a download for a repair manual for A Acer Aspire v5-572p-6446


There may be one available as a block diagramme for a fee on a web site somewhere but that is not common.
Most manufacturer trained computer engineers know how motherboards work alongside the firmware and chosen software so there is no call for them.

Jan 10, 2017 | Acer Computers & Internet

1 Answer

How do i turn off the HDD


What happens when entering the sleep mode is the drives will be turned off and the present state will be kept in memory until awakened. While the system is active the power scheme will prevent the drives from idling down after so many minutes with the never turn off setting applied.

With the turn off drives after the default 20minutes of inactivity that doesn't mean all drives turn off at the exact same time. I've never come across any reference for changing the power plan option for individual drives. But I can point you at the guide for the power plan settings with one instruction on drive settings to apply prior to entering the sleep mode.



hope that helps if not let someone here know.

Oct 03, 2014 | Computers & Internet

2 Answers

How do you get rid of time zone New Zealand?


. You can change the clock's time and time zone.
  1. Open Date and Time by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33_818.jpg, clicking Control Panel, clicking Clock, Language, and Region, and then clicking Date and Time.
  2. Click the Date and Time tab, and then click Change date and time. 18abb370-ac1e-4b6b-b663-e028a75bf05b_48.jpg If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. In the Date and Time Settings dialog box, do one or more of the following:
    • To change the hour, double-click the hour, and then click the arrows to increase or decrease the value.
    • To change the minutes, double-click the minutes, and then click the arrows to increase or decrease the value.
    • To change the seconds, double-click the seconds, and then click the arrows to increase or decrease the value.
  4. When you have finished changing the time settings, click OK.
  5. To change the time zone, click Change time zone.
  6. In the Time Zone Settings dialog box, click your current time zone in the drop-down list, and then click OK.

Aug 19, 2014 | Computers & Internet

1 Answer

Where can I purchase a replacement remote control for tv in WA


Exact OEM replacement remote you can try the manufacturer or www.replacementremotes.com. No store will carry what you are looking for, but you can find universal remotes in any electronic store on the planet. Wal-mart, RadioShack, BestBuy, etc. Whatever is closest to your location. Good rule of thumb is if they sell TVs, they sell universal remotes.

May 21, 2014 | Computers & Internet

1 Answer

Toshiba Satellite A665 S6067 laptop wont recognize my SeaGate FreeAgent Go 500 Gb. device


I had a similar problem and I had to "Delete Volume" when in DIsk Management. I then had a choice to "Create Simple Volume" which I did, and then a wizard created the correct partitions and assigned a drive letter to my external drive. Everything was them OK.

Mar 21, 2014 | Computers & Internet

1 Answer

Removing bluetooth chip


Without knowing what the desktop computer motherboard is, I\'d only be guessing as to location of Wi-Fi chipset.
However even if I knew the motherboard manufacturer name, and model number; the point is Moot.

A) You remove that Wi-Fi chip, and kiss the motherboard goodbye.
It\'s designed into the circuitry of the motherboard.

Isn\'t going to be jumper wires taking it\'s place, and making connections to circuit traces on the motherboard.

B) Do you have a wireless router?
Dunno.
Do you have a wireless connection set up?
No.

You can use just a LAN connection. (Hard wired)

C) Suggest if having a Bluetooth option on your motherboard is not an option then use a different motherboard that doesn\'t have that option.

Regards,
joecoolvette

Apr 06, 2013 | Computers & Internet

1 Answer

How do i reset my computer to an earlier date?


Most computers have a RTC or "real time clock" in the BIOS. BIOS (or "Basic Input Output System") controls how data gets into and out from the processor (via keyboard, disk, etc.). Be careful making changes. The BIOS is normally only accessable when the computer is powered on or reset, and then only while performing the POST (or "Power On Self Test"). At this time your screen may display text describing memory, drives, controllers, etc. Some machine have a "silent boot" enabled which displays a manufacturer's graphic or logo instead of this data. It is during this time the the BIOS may be accessed. Depending on the manufacturer of your computer, a key (Delete, Escape, F1 or some other) or key combination (ALT + F1, ALT + S, or some other) will be needed. It is required to press the key or key combination prior to the Operating System loading message(s). This can be done be repeatedly pressing the key (or key combination) once every second (or two) during the POST. Holding the key(s) down the entire time - or pressing them too often will result in an error, and require starting over again.

Once the BIOS screen is presented, you will have to scroll the entire page(s) to find the clock. Most BIOS brands have more than just a single page of settings. Using the the up, down, left, right, PgUp, PgDn & Enter keys - navigate to the clock hours and minutes and adjust as needed. Make sure that you SAVE changes before exiting the BIOS screen. Upon exit, the computer will reboot with your settings.

Your Operating System may also provide a way for you to change the system time (and date) as well. Try clicking on the time / date to see if it will bring up a dialog box that allows you to make the change.

I hope this helps and good luck! If my answer was helpful, please rate it "4 thumbs up" Thanks!

Jul 27, 2011 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

2,025 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...