Question about Computers & Internet

1 Answer

Monitor goes blank after about 30 minutes. Then you can shut it off and turn it back on and it will work for another 30 minutes or so. What could cause this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 113 Answers

Check your power settings (run>control>power options>change plan settings>advanced options>display)
you will see the setting for your monitor to power off
it should be set to 2 hrs or more if you plan on watching a movie or keeping the monitor on without having to frequently touch the keyboard or mouse.
turning adaptive display on may affect your situation as well. try switching it on.

This should do the trick for you. If not you may have an issue with either your video card or your monitors power supply.
(if the light stays on on the monitor when it goes blank but it doesnt repsond to the mouse or the keyboard, its a setting on your system or the hardware itself)
Good Luck!!

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HD52W59YX38 GOES BLANK


Yes, the model indicated is prone to bad solder connections (among other things) at the high voltage transformer--that would be first thing to look at.


5_2_2012_4_17_22_pm.jpg

May 02, 2012 | Televison & Video

1 Answer

My samsung syncmaster 920nw picuture goes blank after a period of a couple of minutes. If I turn the power off and then back on the picture re-appears but goes off again. It is not he pc since it works...


If you get a flashing screen which show your screen for few minutes and then goes blank it may be an issue with the Monitor.

Try to restart the computer and go to BIOS setup screen. If you experience the same issue in BIOS then the monitor needs a repair or replacement for sure.

Jul 19, 2010 | Samsung SyncMaster 920NW Monitor

1 Answer

Turn on notebook (A200 2 years old). Runs fine for about 10 minutes then screen goes blank. if you plug in an external monitor both screens work. This is not an intermittent problem.


Have you check screen power down could be it is setup to shut down as you say after 10 mins. Access power through control panel, change settings ie to 30 mins
Fingers Crossed>?

Nov 14, 2009 | Computers & Internet

1 Answer

Multisync LCD 1700V turns on then screen goes blank and shuts off


Does the power light stay on? If so, you have an inverter problem. If the power light goes off, you have a power supply problem.

Sep 02, 2009 | NEC MultiSync LCD1700V 17" Flat Panel LCD...

1 Answer

Screen goes black after 30 mins of working.


There are a few things you need to check here.
1. It could be that your computer power management is set to turn your monitor and harddrive off after 30 to 45 min.

If the computer is however working for 30 to 45 min while you doing stuff and it shuts off, the there is an internal problem "Hardware"

I would suggest you check to see if the power management is set to turn off monitor 30 min and harddrive after 45 min. IF that is not so, then we go on to the next test.

It could possibly be your processor fan is not working so once your processor gets over heated it shuts off the computer.

Turn off the computer, remove the case "this is only if you know what you are doing" with the case off, power on the computer and see if the processor fan is working.

You can get back to me and I can walk you through it.

Hope thiss help.

Aug 23, 2009 | Dell Dimension 5100 (D51L1) PC Desktop

1 Answer

Blank screen


Hi

Its inverter or mother board problem power which passes to backlight is cutting off because of over heart (over heart of some IC).

Thanks

Sep 16, 2008 | HP Compaq Presario V2000 Notebook

1 Answer

Acer AL1711 17" LCD Monitor goes blank without warning


The need to reboot your computer to get your monitor working places the blame totally in the computer. You have a virus, or the computer is overheating and shutting down for thermal reasons.
-CharlyV

Jan 26, 2008 | Acer AL1711 17" LCD Monitor

1 Answer

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something basic, such as 800 x 600 @ 60 Hz. Then restart the machine normally.

Jan 21, 2008 | Fujitsu LifeBook C6555 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101592 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...