Question about HP DeskJet Office Equipment & Supplies
Printing is too small a whole page is shrunk down to 2". :-(
Open Control panel >> Printers and Faxes Folder
Right click on Printer icon and click Printer Preferences ( or Printing Preferences )
On Advanced/Layout tab - Select Regular printing ( uncheck option which says Fit to Page )
Try to print.
Posted on Apr 23, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: HP F4180 Printer printing small
Hi Lady Luxe,
Try running the Manual Uninstall solution (click link below):
Then run the HP Installer from your disk (v. 8.0). You may want to also restart your Mac after installation is successful (make sure you complete the Setup Assistant - don't skip it!).
Try to scan from the glass scanner bed to see that your connection is solid. Try to print now and it should be fine.
Posted on Feb 19, 2008
SOURCE: printer problem
Check the power cable
Connect the HP Deskjet F4140 All-in-One directly to the walloutlet
Follow the steps below to power cycle your all-in-one:
1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
2. Wait 30 seconds.
3. Plug in the power cable to All-in-One and also to wall outlet.
4. Check for the functionality
Reset the All-in-One:
1. Press and hold the Cancel button and then press the Start Copy Color button.
2. Release both buttons. The self-test page prints.
Now check the functionality
Posted on Jul 05, 2008
I have the same issue, but with a HP DJ 3550, I´ve heard about the data execution protection (DEP) migth help when changing the options, but still have to try it
Posted on Jul 17, 2008
A few days ago my HP Deskjet, 4100 Series, All In One printer just stopped working in the middle of printing. I got a new power cord/power pack and now the light comes on but there is no response when I try to print. It is as if the machine is not even turned on.
Posted on Jan 14, 2010
Tips for a great answer:
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.
Jun 14, 2011 | HP Deskjet F4100 All-In-One InkJet Printer
Dec 06, 2010 | HP Deskjet F4100 All-In-One InkJet Printer
Jan 05, 2010 | HP Deskjet F4100 All-In-One InkJet Printer
Jan 01, 2010 | HP DeskJet F380 All-In-One Printer
Dec 09, 2009 | HP DeskJet F380 All-In-One Printer
Nov 12, 2009 | HP Deskjet F4100 All-In-One InkJet Printer
Nov 05, 2008 | Office Equipment & Supplies
Jan 31, 2008 | HP Deskjet F4180 All-in-One InkJet Printer
Jan 29, 2008 | HP Deskjet F4180 All-in-One InkJet Printer
90 people viewed this question
Usually answered in minutes!