Question about Briggs & Stratton Garden
Model 129882 i/c 5.5
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Home Depot has the plug you need for briggs 6.5hp engines. Don't worry about it being a Murray. Buy a Briggs 6.5hp plug.
Posted on Jun 26, 2009
This is not unusual at idle; there is a governor to limit maximum RPMs and this device isn't worth beans at an idle.
You may be able to carefully adjust the idle adjustment (see your manual or B&S website) to achieve a somewhat more even idle speed.
Posted on Aug 20, 2009
Find the B&S website and you should be able to download a parts or service manual.
Think it is briggsandstratton.com.
You will also need your type number (after the 92908).
Posted on Apr 18, 2010
Sounds like you will need to clean your carburetor.
Sometimes you can get by with priming it a few times, and letting it
run a few times like that and it will flush the gunk out of the jets,
but most of the time you will need to rebuild the carburetor.
If the mower is over a couple years old, then I also recommend that you
buy and install a new carburetor repair kit, because the diaphragm will
get hard and that will cause it to be hard to crank.
When you clean your carburetor and remove the jet screws, count the
number of turns it takes to seat the jets from their original position.
That way when you go to put the jets back in, you know how many turns
they were in/out.
Please rate me, Thanks
Good Luck, I hope this helped
Posted on May 15, 2010
Do a compression check when cold, then again when hot. Sounds like when its hot your losing compression. If this is the case, it won't want to start when hot. Compression should be above 60 lbs. Thats where i would start. I hope this is of some help to you.
Posted on May 29, 2010
Testimonial: "Prompt and useful help. Thank you."
Tips for a great answer:
Dec 23, 2016 | Briggs & Stratton Garden
May 06, 2016 | Garden
May 06, 2016 | Cars & Trucks
Oct 07, 2014 | Briggs & Stratton Quantum Lawn Mower...
Oct 01, 2014 | Briggs & Stratton Briggs Stratton...
May 14, 2012 | Briggs & Stratton Garden
Jan 01, 2011 | Briggs & Stratton Briggs Stratton...
Nov 01, 2010 | Briggs & Stratton Briggs Stratton Intek V...
Sep 19, 2009 | Briggs & Stratton Garden
Jun 26, 2009 | Garden
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: