Question about HP Office Equipment & Supplies
The copies that are sent from the computer print fine. When we make copies they are too light.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did you check HP's site? Give them a try @ http://h10061.www1.hp.com/ccsearch/search?pname=HP+Officejet+7110+All-in-One&qry=+scanner+can+not+communicate+with+computer&ctry=us&lc=en&dlc=en&mode=lz&tmv=0&method=prodFinder&pid=91473&productBigSeriesOid=91461&spid=91472&opname=HP+Officejet+7110+All-in-One&pname_desc=HP+Officejet+7110+All-in-One&ptype=consumer&stype=pn&contextual_lname=&spname=HP+Officejet+7110+All-in-One&temp_hql=s-001%2Cs-002%2Cs-004%2Cs-003%2Cs-005%2Cs-006%2Cs-017%2Cz-001%2Cc-002%2Cc-001&search=0&submit.x=8&submit.y=7
Posted on Feb 11, 2008
SOURCE: hp laserjet m1319 mfp series
Are you using the software that shipped with the machine? I use the" HP Scan To" program which allows me to scan it to a slew of file types.
The only downer: I can't put the software on more than 1 computer. Apparently, it recognizes that the printer is hooked up to another machine and won't let me install any drivers on other computers (except the print driver).
Posted on Oct 06, 2008
1. Ensure that paper trays are loaded and adjusted properly so media can feed from the tray. It might be necessary to reduce the stack height of media in the tray. 2. Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media meets the specifications. 5. Check the pickup feed and separation rollers for unusual wear. Replace as needed. 6. Rotate the media in the input tray by 180° and/or turn it over
Posted on May 04, 2009
Open the ADF, the top of the scanner/copier.
The ADF glass is the thin strip of glass on the left. Damp cloth with windex or any glass cleaner. Scrub the strip of glass.
Posted on Jan 29, 2010
I had the same issue... and found this to finally work after reviewing many sites.
System Setup - Print Quality - Adjust Alignment
Posted on Mar 08, 2011
Tips for a great answer:
May 12, 2016 | Konica Minolta Bizhub C451...
Dec 05, 2014 | HP Hewlett-Packard - LaserJet Pro 300...
Mar 19, 2014 | HP LaserJet 3030 All-in-One
Jan 26, 2013 | Brother DCP 130C All-In-One InkJet Printer
May 05, 2011 | HP Officejet Pro L7780 All-In-One InkJet...
May 07, 2009 | HP LaserJet 4250n Printer
Nov 20, 2017 | HP Office Equipment & Supplies
141 people viewed this question
Usually answered in minutes!