Question about GE 24 in. GSD2220Z Built-in Dishwasher

1 Answer

GE dishwasher my dishwasher comes on then goes off by itself before it finishes it cycle.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Ok, this will occur if the dishwasher timer control module become unstable overtime. this will require the replacement of the affected timer control or control board asap.

Posted on Jun 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a ge profile dishwasher the panal (digital) comes on and goes through the cycle however no water seems to be dispensing during the cycle. Water is on and all hoses are already cleaned and hook


water inlet valve needs replaced its on the other end of the water inlet pipe on the machine,to buy about 15 dollars its a standard part so dont go to ge dealer as they will charge about 90 dollars,make sure power is of when replacing its what I would call a easy job .,,,,Adrian....

Jan 25, 2015 | GE Dishwashers

1 Answer

I have GE GLDT696TSS. The dishes are not clean and one time noticed water leak from the back of the washer.


You should check the water outlet - probably discharges into your sink through a garbage disposal - the water outlet is likely plugged and water can not discharge down the sink. You can remove the hose and clean it out.

Apr 06, 2014 | GE GLDT696TSS Builtin Dishwasher

1 Answer

I have a gsd5610 and my drying button is blinking.the unit will not start


Someone opened your DW during last washing cycle. The Machine paused but no-one pushed the button to resume the cycle. It's still waiting for you to tell it to finish last cycle. Press your PAUSE/Cancel button 'til the light goes off. Then use your machine as you normally would.

Hope this info was helpful to you. Good Luck! :-)

Jan 31, 2010 | GE 24 in. GSD5930 Built-in Dishwasher

1 Answer

Dishwasher won't cycle


Sounds like you need a new timer. Costs about $50 - $60. I had the same problem. The knob now turns. Hope this helps.

May 18, 2009 | GE Nautilus 24" Built-in Dishwasher

1 Answer

GE Nautilus won't drain after Rinse Cycle


Check disposer plug. If a garbage disposer has been recently installed, it is possible the disposer drain plug was not removed. The drain plug is a plastic piece in the disposer that blocks the hole where the dishwasher hose connects. Also check the hose connected to the disposal. Mine apparently had a kink in it. When I straightened the hose the dishwasher drained at full speed (I recently had a plumber re-route a hot waterline. He must has bent the hose). Hope this helps. If not go to the GE website. That's where I found my answer.

Nov 03, 2007 | GE 25 in. Nautilus GSC3400J Free-standing...

Not finding what you are looking for?
GE 24 in. GSD2220Z Built-in Dishwasher Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...