Fuel mixture for efco 220 brushcutter - Garden

Fuel mixture ratio

Oil Mix Ratio:
Starting in the early to mid 90s Dolmar, Echo, efco, Homelite, Husqvarna, Jonsered, Makita, Oleo-Mac, Red Max, Ryobi, Shindaiwa, Solo, Spear & Jackson, Stihl and Tanaka all started recommending 50:1

• 1 gallon of premium fuel to 2.6 ounces of quality 2-cycle oil or
• 4 liters of premium fuel to 80 milliliters of quality 2-cycle oil.

McCulloch, Poulan & Wen recommend 40:1

• 1 gallon of premium fuel to 3.2 ounces of quality 2-cycle oil or
• 4 liters of premium fuel to 100 milliliters of quality 2-cycle oil.

https://www.youtube.com/watch?v=4SN89-x-M88
youtube has a ton of info on the STIHL

Check your air filter,clean or replace,use 50:1 gas-oil mixture ,try a new plug.Is your gas old.If you remove plug.is gasy.

Your carb is probably clogged at the tiny screen side of the carb. Or your fuel filter inside the tank is bad and it's not letting fuel to the carb. It seems like a fuel deficiency problem.

Wallace it will be 40:1. ONE part two stroke oil to FORTY petrol

standard ! 100-130 ml oil for 5 Liter gasolin!

40:1 mix, 3.2 oz of 2 stroke oil for every gallon of gas.
Link to the manual is below
http://www.poulanpro.com/ddoc/POUO/POUO2001_USen/POUO2001_USen__530088910.pdf

Oil Mix Ratio:

Starting in the early to mid 90s Dolmar, Echo, efco, Homelite, Husqvarna, Jonsered, Makita, Oleo-Mac, Red Max, Ryobi, Shindaiwa, Solo, Spear & Jackson, Stihl and Tanaka all started recommending 50:1

• 1 gallon of premium fuel to 2.6 ounces of quality 2-cycle oil or
• 4 liters of premium fuel to 80 milliliters of quality 2-cycle oil.

McCulloch, Poulan & Wen recommend 40:1

• 1 gallon of premium fuel to 3.2 ounces of quality 2-cycle oil or
• 4 liters of premium fuel to 100 milliliters of quality 2-cycle oil.

Chinese chainsaws recommend 25:1.

Husqvarna recommends 50:1
1 gallon of premium fuel to 2.6 ounces of quality 2-cycle oil.
4 liters of premium fuel to 80 milliliters of quality 2-cycle oil.

Dolmar, Echo, Efco, Homelite, Husqvarna, Jonsered, Makita, Oleo-Mac, Red Max, Ryobi, Shindaiwa, Solo, Stihl & Tanaka; all recommend 50:1.
McCulloch & Poulan; recommend 40:1.
Chinese chainsaws recommend 25:1.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

if you buy the small bottles of oil mix it with one gallon of gas easiest way .