Question about Canon PIXMA iP1800 InkJet Photo Printer

4 Answers

Canon ip1800 printer won't print.

I replaced my ink cartridges but now my printer will not print my documents. How do I fix this?

Posted by on

  • 4 more comments 
  • smbcuet Mar 18, 2009

    i just want to print out the paper but everytime there is a message dat the ink does not recognise. Whats the matter?
    Sharif Mahmud Bhuiyan,
    Sharif_bhuiyan2001@yahoo.com


  • mshooks Mar 28, 2009

    Says cart is incorrect, don't know how to fix??

  • rrwollan Apr 11, 2009

    Mine says that the cartridge is installed improperly. The cartridges ould not move from the print position (right) into the replace cartridge position (left). Unfortunately, someone tried to help & manually pulled the cartridges to the left-most position. There was not an error # with the message.

  • wharwhick Apr 12, 2009

    My Canon PIXMA iP1880 printer cannot print and shows a message "ink absorber is full" can u help me this problem.tanx

  • pulack_23jan Apr 15, 2009

    i refilled my cartridge weeks earlier and not used for 1 wk.now while i try to print it shows cartridge not fit/ compatible..cant do the cleaning as well...my printer is canon pixma ip1880. wat to do??

  • Nadia Potgieter
    Nadia Potgieter Apr 15, 2009

    replaced ink and now i can't print

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My Canon PIXMA iP1880 cannot print...and shows a message "ink absorber is full" can u help me this problem..

Posted on Apr 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My printer is ip1880 even i replace new cartridge, and have a message the ink is running low and user intervention required message appear. please help my problem

Posted on Apr 14, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

@evawal

explain further what happened your problem...

@smbcuet
i think the print head was burned or it was shor circuit... because that also my problem. and cartridge can never be use.

Posted on Apr 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need canon ip 1880 service tool

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yellow ink faded on one side of copy


Ink News - How To Correct Faded Prints From Toner ...

www.inkpal.com/ink.../tips-to-correct-faded-prints-from-toner-cartridges...

Rating: 3 - ‎12 votes
Mar 30, 2012 - You should particularly suspect this if the prints are faded on only one side and if the printer is not telling you to replace the toner cartridge.Missing: yellow

HP Officejet 6500 Printers - Fixing Print Quality Problems ...

support.hp.com/us-en/document/c01641184

Jan 16, 2016 | Office Equipment & Supplies

1 Answer

Prints no ink


Try to re-seat the cartridges in the printer. Open the printer cover > remove the cartridges > close the printer cover > re-brick you printer by pulling out the power supply - black box behind the printer where the power cord is plugged in, and re-plug after 10 seconds. When the printer turns on, reinsert the cartridges and close the cover. Try to print a document again to verify that the problem is fixed.

If that doesn't help, the problem could be due to a clogged print cartridge nozzle. Please follow the steps below to fix print quality issues with your model:

  1. On your computer, go to Start menu.
  2. Go to Programs.
  3. Go to Lexmark 1300 Series folder.
  4. Select Lexmark Solution Center / All-In-One Center.

From the Maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through to clean the print cartridge nozzles.

After printing the test page, try to print a document again to verify that the problem is fixed.

Feb 14, 2012 | Lexmark Z1300 InkJet Photo Printer

1 Answer

Ran out of ink, changed the ink and the printer prints a blank paper...checked the ink everything is good...still nothing printing??


Make sure you are inserting genuine Lexmark cartridges.
Try to re-seat the cartridges into the printer. Remove the cartridges > close the printer cover > unplug / re-plug the printer into the power source to reset it > when the printer turns on, firmly reinsert the cartridges. Try to print a document again to verify that the problem is fixed.
If that doesn't help, try to clean the print cartridge nozzles. Open the Lexmark Solution Center on your computer by going to Start menu > Programs / All Programs > Lexmark Z600 Series > Maintenance tab > Under Select a Maintenace tool, select Clean to fix horizontal streaks. > click Print. Then try to print a document again.

Sep 13, 2011 | Lexmark Z615 InkJet Printer

1 Answer

How do i install my ink cartridges into my epson stylus nx125


Starts on page 23. http://files.support.epson.com/pdf/nx125_/nx125_qr.pdf
Replacing Ink Cartridges Make sure you have a new ink cartridge before you begin. You must install new cartridges immediately after removing the old ones. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Note: Leave the expended cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. 1. Turn on your printer. 2. If an ink cartridge is expended, the error and ink lights on the control panel stay on. 3. Open the document cover, then open the ink cover. Caution: Do not remove the ink cartridge guard or you may damage the printer.24 Maintaining Your Printer 4. Press the y Stop button. If a cartridge is low or expended, the print head moves that cartridge to the replacement position to indicate that it should be replaced. The P Power light starts flashing. If two or more ink cartridges are expended, the expended cartridge at the far left moves to the replacement position. The P Power light starts flashing. If no cartridges are low or expended, the print head does not move. Note: Do not hold the y Stop button for more than three seconds, or the printer may start cleaning the print head. 5. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children.Replacing Ink Cartridges 25 6. Before you open the new cartridge package, shake it gently four or five times. Then remove the cartridge from the package. Caution: Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 7. Remove the yellow tape from the bottom of the ink cartridge. Caution: Do not remove any other labels or seals, or ink may leak. 8. Insert the new ink cartridge into the holder and push it down until it clicks into place. 9. Press the y Stop button. If another cartridge is low or expended, it moves to the replacement position. Repeat steps 5 through 8 to replace any other cartridges that need to be replaced. When you press the y Stop button and no other cartridges need to be replaced, the print head moves to its home position and the printer starts priming the ink. This takes about 1 1/2 minutes.26 Maintaining Your Printer When the P Power light stops flashing and the error and ink lights go out, ink charging is finished. 10. Close the ink cover, then close the document cover. Caution: Never turn off the your Epson printer while ink is charging or you'll waste ink. If the error and ink lights remain on after the print head moves into its home position, an ink cartridge may not be installed properly. Press the y Stop button again, and then press the ink cartridge down securely. Note: If you replaced a cartridge while copying a document or photo, cancel printing and make sure your original is still placed correctly on the document table. Then copy your original again. If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Mar 09, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Cannot print in color - HP C6180


hi,

below is the document that i would like you to follow. If still the document wont resolve your issue, please call 1-800-474-6836 for tech support. Also, check the warranty of the printer, and if the tech found out that its an ink problem, then they can go ahead and have it replace.

CLICK HERE ==>> DOCUMENT

thank you.

adonscott

Sep 07, 2008 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Mp140 e2


E3 – Paper jam error.
How to correct, fix: Remove the jammed paper. If paper jams frequently occur, check the following:
1. Confirm there is no foreign material inside the machine.
2. Confirm only recommended paper is installed.
3. Confirm paper is installed properly.
4. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark.

E4 – Empty ink tank.
How to correct, fix: An ink cartridge is empty. To cancel printing, press the <Stop/Reset> button. To continue printing, press <Black> or <Color> button. After printing completes, replace the empty ink cartridge. Printing with an empty ink cartridge may cause the machine to malfunction.

E5 – The ink cartridge(s) is not installed. The ink cartridge(s) cannot be recognized.
How to correct, fix: Make sure to install both ink cartridges even when you set the machine to use only one ink cartridge in printing. If one of the ink cartridges is missing, this error can occur.

E7 – The ink cartridge is not installed in the appropriate position.
How to correct, fix: The ink cartridge is not installed in the proper position. Install each ink cartridge in the proper position.

E8 – The ink wasteabsorber is almost full.
How to correct, fix: The waste ink absorber is getting full. Press the <Black> or <Color> button to clear the error and continue printing. Printing can continue until the waste ink absorber becomes full. If the waste ink absorber becomes full, the machine will require service. The waste ink absorber is a part inside the machine, which absorbs ink used in the cleaning operations.

E9 – A specified period of time has elapsed without receiving a response from the digital camera. A print mode compliant with PictBridge is not selected. A specified period of time has elapsed without receiving a response from the digital camera.
How to correct, fix: The machine cannot communicate with the connected camera. Disconnect the cable between the machine and the camera to clear the error. Check the following items, then try printing again.
1. Confirm that the camera you are using supports PictBridge or Canon Bubble Jet Direct. If the camera does not support either one, the machine cannot print directly from the camera.
2. Set the camera in PictBridge print mode before it is connected to the machine. This is required before printing for some cameras that support PictBridge. Please refer to the camera instructions for more information about procedures required before and after connection to the machine.
3. There may have been no response from the camera for the prescribed time. Re-connect the cable between the camera and the machine.

E14 – Ink cartridge cannot be recognized.
How to correct, fix: Unsupported ink cartridge may be installed.

E15 – Install only recommended ink cartridges.
How to correct, fix: Install only recommended ink cartridges.

E16 – The ink level cannot be correctly recognized or detected.
How to correct, fix: A used ink cartridge may be installed, or the ink cartridge is empty. Press the <Black> or <Color> button, to clear the error and continue printing without replacing the ink cartridge. However, the remaining ink amount cannot be detected properly, so the function to detect the remaining ink amount does not operate.

E19 – Scanning failed error.
How to correct, fix: Scanning a document failed. Check if the document is placed in the correct orientation position and try the operation again.

Aug 01, 2008 | Canon MP140 PHOTO AIO All-In-One InkJet...

1 Answer

Not printing after color cartridge ran out - new black cartridge installed.


Yes, this printer has fixed printheads and must have ink in each color to prevent damage to the printheads. Even when printing black only each color is spit in the servicing area to keep the printhead unclogged.

Regards,
Bob Headrick, Microsoft MVP Printing/Imaging

Jul 18, 2008 | Epson Stylus C60 InkJet Printer

3 Answers

How to Override Ink Level Gauge When Using Refilled Cartridges


This maybe in the manual under ink tank replacement, most cannons have this, but keep in mind that sometimes the ink feed tubes to the print head get clogged and then the printer will report no ink at all, these cansometimes be cleaned by soaking them in acholol

May 28, 2008 | Canon PIXMA iP3300 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

2,129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1841 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...