Question about Uniden DCT648-3 Cordless Phone

Open Question

Uniden as 116-sl registration failed - Uniden DCT648-3 Cordless Phone

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you register a old uniden SSE27 handset to a new Uniden SSE37 base


The following is taken directly from the SSE37 owners' manual:

Registering a handset
If you see a "not registered" message on a handset,
you must register it to a base before using it.
1.
On the base, open the menu and select
Register Accy.
2.
On the handset, press and hold #/DND
until the handset display says
Handset Registering (about 2 seconds).
3.
Wait until the handset display says
Registration Complete (about 30 seconds),
then pick up the handset.
If you don't hear a dial tone or the display says
Registration Failed, charge the battery completely,
then try again.


Good luck!

Feb 19, 2015 | Uniden Lands Phones

1 Answer

HOW DO U CONNECT THE HANDSET TO THE BASE.ALREADY TRIED THE REGISTER BUTTON,DID NOT WORK.IT CAME WITH NO DIRECTIONS,WE BOUGHT AT A FLE MARKET FOR 5 DOLLARS.


Are you sure of the model number? The D1680 should register the handset when you put it on the base for 30 seconds. (You should see Handset Registering followed by Registration Complete.) Then press Talk/Flash to check for dial tone. On this model if the registration fails, charge the battery (or replace the battery and then charge that). Then repeat the registration.
The manual for the Uniden D1680 is available here: http://news.uniden.com/pdf/D1680om.pdf .

For other Uniden phones, like the DEC1060, you need to navigate through the handset menus to find the Handset Registration command. Then press and hold the Register Handset (Find Handset) key on the base for 3+ secondsThen the base and handset will synch. (Low batteries could interfere with the process.)

For the D3288, you access the base menu for Register Accy and then press and hold # on the handset for 30+ seconds. (You will see Registering followed by Registration Complete.)


Additional Uniden cordless phone manuals are available here: http://www.uniden.com/scat/cordlessphones_mnl .

I hope this helps.

Cindy Wells
(with a flea market phone, my first suggestion is to try a new battery for the handset. They only have a given number of recharge cycles and you do not know the history. However, sometimes the chargers do fail and a new battery will not work. In that case, the phone should be replaced. It isn't worth the cost of out-of-warranty repairs.)

Jul 01, 2011 | Uniden D1680 Cordless Phone

1 Answer

Setting up my outgoing message: just purchased Uniden cordless DECT 1580. Manual says select command 8. How do I find Command 8? thanks, joan


Hi,

please follow the instruction to register the handset to base

To register a DCX150 accessory handset:
1. Charge the handset completely.
2.Place the handset in the base cradle for about thirty seconds. Handset Registering will appear in the LCD.
3.When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.

If the display shows Registration failed, repeat the process again.

To register a DCX200 or DCX300 accessory handset:

1.Charge the handset completely.
2.Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep holding find until the charge LED starts to blink.
3.On the handset, press and hold # until the handset beeps and displays Handset Registering.
4.When the handset has registered to the base, the LCD will display Registration complete then show the handset
ID number.

If the display shows Registration failed, repeat the process again.

Thanx

Jul 21, 2010 | Uniden Cordless Phone

1 Answer

Redistration to other brand DECT 6.0 base failed.


DECT 6.0 IS JUST A MARKET NAME FOR DIFFERENT BRANDS, THE WATERPROOF DWX207 WILL ONLY WORK WITH UNIDEN PHONES, ONLY BECAUSE YOU WANT THEM TO WORK TOGETHER DOES NOT MEAN THEY WILL WORK TOGETHER...

May 22, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

REGISTRATION FAILED


Try and retrieve battery then put it back
push program key: registration: yes (program key)
then press page key on base then program key on handset when it beeps

Sep 06, 2008 | Uniden Cordless Phone

1 Answer

Tru 9496


SOLUTION:

1. First, remove the battery cover on your unregistered TCX905 and look under the battery to confirm that you indeed purchased a TCX905 because some Uniden handsets were packaged as 905's but were not.

2. Take the fully charged unregistered 905 to the base unit TRU9496.

3. On the TRU 9496 base unit press "Menu" then select "Registration" and press OK

4. You should get the message "press the # key on the remote handset".

5. Depress the "#" key on the unregistered 905 and it should register.

Aug 07, 2008 | Uniden TCX905 Cordless Accessory Handset...

1 Answer

Registration


HI TEAM ,

PLZ SEARCH MY COMPUTER SCANING PROBLEM INSIDE.

REGARDS
A. S ENTERPRISES.
KANPUR

Oct 13, 2007 | Uniden Cordless Phone

1 Answer

Register additional handsets on a Uniden phone


please help me to register additional head set
MODLE NO IS DXA 15588-2

Sep 23, 2007 | Uniden 5.8GHz Cordless Phone

Not finding what you are looking for?
Uniden DCT648-3 Cordless Phone Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...